Jump to content
SAU Community

Recommended Posts

  • Replies 238
  • Created
  • Last Reply

Top Posters In This Topic

i take it you guys who are meeting up in the SE are still meeting us all at the Point cook exit shell/subway (as per the first post in this thread) as this is the actual meet up point, we want as many skylines as possible all together to cruise to geelong.

we'll be stopping there at the bunnings for a lil bit while we pick up out SAU geelong peeps and wait for others to catch up :(

mark

Guest RedLineGTR
Originally posted by qikshift

i take it you guys who are meeting up in the SE are still meeting us all at the Point cook exit shell/subway (as per the first post in this thread) as this is the actual meet up point, we want as many skylines as possible all together to cruise to geelong.

we'll be stopping there at the bunnings for a lil bit while we pick up out SAU geelong peeps and wait for others to catch up :(

mark

Yep we are mark...some are meeting in the glen area then they are gonna pop buy my area then on the way to the city we will be meeting up with another maybe 2-3-4 other cars then heading to the point cook exit.

Cheers Rob

Guest RedLineGTR

Okay Pre-Meet #2

McDonalds© - Corner, Chadstone Road & Princes Hwy (Mel 69 D4)

Time – Meet 8:30am – Depart 8:40am( Roughly ) Then we travel along the Princes Hwy (Dandenong Road) Towards The city which on the way we will join JamesZilla & whoever else is waiting with him (Around The Prahran Area) Then we will continue to the Main Meet point (Refer to First Page).

This meet is for all the people coming from this side of town, like the people who are meeting @ Glen Waverly etc…

You do not have to meet here if you don’t want to, I will be waiting their early having some McBreakfast goodies (I’ll be most likely on the outside tables) I will be waiting till 8:50am at MAX (if worse comes to worse) since that is the time that I have arranged to meet jameszilla about 8:50-9:00am and I really don’t want to keep people waiting.

Whoever feels comfortable to lead the pack to the main meet point be my guest as long as you have a good idea where to go (assume most people have had a look at the melway). I’m going to check over the melway properly so I know exactly where I need to go and set some pace at the front if need be.

Please Tank up fuel either at the Main meet point (Refer to First Page) or before we start cruising from the Chadstone area as I rather not stop until we get to the main point.

The times are set so we get their on time & not be late. Like mentioned before if you want to come to Chadstone McDonalds I’ll be waiting if not that’s fine.

Any questions Pm or email me.

Cheers Rob

Just a quick memo for people going on this cruise.

There may be mobile/fixed speed cameras at the following locations on the GOR:

Site Suburb Between Streets MelwayRef

The Great Ocean Road Aireys Inlet Alice Road and Albert Avenue NULL

Great Ocean Road (100) Anglesea Minter Road and Forest Road 196K2

The Great Ocean Road Anglesea Anglesea River and Minifie Avenue 196F7

Great Ocean Road Apollo Bay Joyce Street and Marriners Lookout Road NULL

The Great Ocean Road Eastern View Spout Creek abd Coalmine Creek NULL

Great Ocean Road (80) Fairhaven 60/80km signs and Old Coach Road 511C10

Great Ocean Road (70) Jan Juc Duffields Road and Strathmore Drive 237C7

The Great Ocean Road Lorne Allen Street and Erskine River NULL

The Great Ocean Road Point Roadknight Tenth Avenue and Third Avenue 196C10

Great Ocean Road Port Campbell McCue Street and son of rajab Street

You have been warned....

might have to bring the paint ball gun to splatter a few cameras hahahah, oh well.. im sure there will be pleanty of sunday drivers down there as usual anyways :D its going to be a crazy site to see approx 30ish lines hopefully crusing down there :D

mark

Guest RedLineGTR

Been watching the weather for this weekend and this week. Seems to be just perfect weather nice and cool for those intercoolers and some extra boost. Fingers crossed it dosent rain knowing people some will bail if it rains. I dont care i dont mind seeing some drifting jap styles....Yay




  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...