Jump to content
SAU Community

Recommended Posts

Anyone have any overheating issues with their car on these past few days? Mine never had this problem before until a few days ago, my water temp gauge rose to 2/3 of the gauge when it's usually in the middle. So I had to turn off my A/C so that the tempreture can drop back to normal.

I thought my water pump or thermostat was failing since it has never happened in the last 3 years of owning it. But this happened to a friend of mine too so I wasn't sure if it's just the heat or something wrong with my car.

If this is uncommon, then I will take the car out to the mechanic to check. The coolant in my radiator is still full so that wasn't the problem I think.

Link to comment
https://www.sau.com.au/forums/topic/210583-over-heating-issues/
Share on other sites

Also be sure to check your radiator fan for issues, I think thats the source of my overheating issue.

One way to check is get a friend to start the car when its pretty warm. Hold the fan gently, with a finger or similar, do not misinterpret this post to mean shove your hand straight into the fan and see what happens.

If the fan try's to turn with some force then its working.

If its like mine you can hold it with one finger and even after you let it go it takes a while to start spinning again.

Oh, and if you injure yourself by doing this I take no responsibility whatsoever :).

Edited by some_cs_student
Also be sure to check your radiator fan for issues, I think thats the source of my overheating issue.

One way to check is get a friend to start the car when its pretty warm. Hold the fan.

If the fan try's to turn with some force then its working.

If its like mine you can hold it with one finger and even after you let it go it takes a while to start spinning again.

I prob wouldn't recommend stickin your hand in there and cranking the car.....

Also be sure to check your radiator fan for issues, I think thats the source of my overheating issue.

One way to check is get a friend to start the car when its pretty warm. Hold the fan.

If the fan try's to turn with some force then its working.

If its like mine you can hold it with one finger and even after you let it go it takes a while to start spinning again.

You can use something else, for Christs sake don't use your hand lol.

lol, the fans not that hard to hold still when you start the engine, the coupling just slips the same as when the engine is revving which is what keeps the fan at a fairly constant speed. I wouldn't go putting my hand in there when it's already spinning but otherwise.....

I get my coolant changed once a year, just before summer. If you changed yours 30,000km ago, maybe try a full flush. Always best to start simple. Also get a pressure test done on the system to see if you have any leaks and if you have time pull off your front bar and clean up leaves/crap that's infront of your radiator.

If that doesn't fix it, I'd be looking at the thermostat (replace) or maybe a clogged radiator (flush/rod).

lol man do NOT stick your hand in ther

dumbest idea ever

I've done it on 2 different cars, and I'm fine.

I don't mean put your entire hand into the fan, I mean touch the end of the fan blade and start it, if it pulls away from you then its working.

Of course if you're stupid enough to put your entire hand in there then you've misinterpreted my advice.

Also see if its spins after you turn the engine off after its warmed up, my fan spins for a long time...

Also be sure to check your radiator fan for issues, I think thats the source of my overheating issue.

One way to check is get a friend to start the car when its pretty warm. Hold the fan gently, with a finger or similar, do not misinterpret this post to mean shove your hand straight into the fan and see what happens.

If the fan try's to turn with some force then its working.

If its like mine you can hold it with one finger and even after you let it go it takes a while to start spinning again.

Oh, and if you injure yourself by doing this I take no responsibility whatsoever :P.

LOL... ...try sticking your dick in there... *clacka clacka clack* ;)

LOL... Well.. you guys can try sticking your dick in there if you want.. but I used a branch and tried to put it in slowly.

It smacked my stick away so I'm assuming that my fan is still strong and it feels like its blowing hard.

Maybe I will try a flush first and see how it goes from there.

LOL... Well.. you guys can try sticking your dick in there if you want.. but I used a branch and tried to put it in slowly.

It smacked my stick away so I'm assuming that my fan is still strong and it feels like its blowing hard.

Maybe I will try a flush first and see how it goes from there.

Did you put the branch in while its spinning?

Or did you try putting the stick on it when you started it? If it pushes the stick out from idle when it starts moving then your fine, just don't drop the stick into the fan. lol.

Good luck with fixing the issue.

you gotta put in fact as well that the jap cars such as skylines werent made for Australian weather also, mechanic told me that one time and that could be one reason for it as well some one correct me if im wrong.

Japanese weather does not hit these one off hot days, but it does get very hot and humid for weeks at a time... That is why Japanese cars have much better cooling systems and air conditioners than Euro cars of the same age.... Most of us own cars that are over 10 years old, you have to expect them to get a bit upset when it gets hot...

Citroen CX aircon was so weak, that for Japanese and Australian markers, twin air conditionsers were fitted.... They added another one in the boot... It is also once of the reasons that the Commodore grew away from the Opel versions they were based on from the VL. Holden needed more space for the larger Aus spec air con units.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...