Jump to content
SAU Community

Recommended Posts

Not sure how low your springs are, but when I've worked on springs and taking them off, they've always had enough pressure to throw the nut through a garage door! ;)

Just go and buy a set of spring compressors from supercheap mate. Something like $50 for the pair. There's a sale on now as well, take advantage of it.

Edit: It's not the spring you should be scared of. It's the nut.

Edited by adam-__-

The compressor's just a clamp which holds the coils of the springs. Go and grab a spring and squeeze it with your bare hands, that's pretty much how they work, but you screw it in with a shifter. I can tell you now that it's a pain in the arse to do. If only I had an air gun or something.

Where abouts are you located? I've got one you can borrow if you'd like.

The compressor's just a clamp which holds the coils of the springs. Go and grab a spring and squeeze it with your bare hands, that's pretty much how they work, but you screw it in with a shifter. I can tell you now that it's a pain in the arse to do. If only I had an air gun or something.

Where abouts are you located? I've got one you can borrow if you'd like.

im in canterbury

so its around camberwell/kew/balwyn

if i could that would be awesome

otherwise

ill just get one from autobarn or something

and then i can get some stands too so i can get under the car for other operations :)

I'm in the Noble Park, Dandenong area, so if you want to borrow them, PM me and I'll give you more details.

They're only $50 from supercheap and you use them more than once, so it's up to you if you want to borrow them or just buy a pair for yourself. :no:

Just let me know if you need them.

^^ yeah thanks for the offer

but like you said for 50 bucks i might as well get some from supercheap

i got mine from supercrap, i thought they were a bit cheaper than $50 tho.

At least if you buy a set, you'll be able to lend them out to your mates in exchange for beer.

Be very careful guys or you'll end up looking like one of the guys from Rambo 4, that is you'll only have half a head!!!

I've seen the hats off these go through roofs so take care when pulling apart if unsure take it to a pro and keep your face and teeth looking good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I am well aware as I did rant at him to buy a MX5, buy the 2.5 before he DIY'ed it, etc as well as do things to the holden. He will obtain a ND. It's the best of both worlds. They look great in person, definitely the best looking one. Just a matter of time now.
    • Remember this is the same person who said he’d never own an nc 
    • ouch! how is the car now?I had sold my gtr but have been looking into some on trademe and a 260RS but I wouldnt be keen on any repairs needed on them
    • This sounds like someone who would have owned an R33 in their past... It's okay, I'm 100% picking up what you're putting down Mark.
    • Just back on what was raised about jacking off the the tow/tie down point on the front of cars. I've used it plenty. I've also watched it on a car where you could see it move the front end of the car. It was like the front end/whole car being tweaked and twisted a bit. I will say, I struggle to find good jacking points on MOST cars. The ones that have good points, I then normally struggle to find a jack tall enough to make the car change height!   One of my go to points for either the jack, or the axel stands though, is either a suspension pickup point, OR a subframe to chassis major bolting point. I actually think its the subframe on my R33 that has a bit of a bend in it, from being jacked in the middle too. However, it could have been one of my many other cars I've had over the years! Or it could also be the from me jacking it up, and the fact the top of the front radiator support isn't there, so it can allow the front of the car to move and bend etc.
×
×
  • Create New...