Jump to content
SAU Community

Recommended Posts

I have spent many hours reading about HICAS this morning, and finally understand what it actually is and what it can do. I only plan on street driving, and definately wouldnt be looking at using my car seriously at the track for a few years. My thought is to keep HICAS for the time-being when my car (car to be...) R33 GTS will just be a daily driver/street car. Would you guys agree???

Link to comment
https://www.sau.com.au/forums/topic/210897-hicas-for-street-use-only/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

I have spent many hours reading about HICAS this morning, and finally understand what it actually is and what it can do. I only plan on street driving, and definately wouldnt be looking at using my car seriously at the track for a few years. My thought is to keep HICAS for the time-being when my car (car to be...) R33 GTS will just be a daily driver/street car. Would you guys agree???

Definently agree.

For street use, and even some 'spirited' driving through some nice twisty corners, the HICAS is actually quite good. It allows the car to remain slightly better balanced through the corners. The problems occur as soon as the rear end has let go (i.e. for drifting, etc), when it leaves you with a kinda 'sloppy' feeling.

The first time you feel the HICAS kick in at high speeds (it only kicks in after about 70km/h iirc) it can feel quite unnerving... almost like understeer but not at the same time! Once you're used to it, it's okay. For "grip racing", its really quite good... but for anything where you want to maintain control over the rear end without the computer trying to "help" you, it's gotta go.

also removing hicas will make your car feel heavier when parking etc...

with 18" rims, 320mm steering wheel and hicas removed mine is like an anvil... but you get used to it pretty quick...

also removing hicas will make your car feel heavier when parking etc...

with 18" rims, 320mm steering wheel and hicas removed mine is like an anvil... but you get used to it pretty quick...

Really? It really shouldn't make any difference whatsoever. The HICAS is designed to only kick in at higher speeds (i.e. 70km/h+ iirc), and doesn't move under that (unless you're parking at some serious speeds! :thumbsup:)

The 4WS system on the Honda's is designed as a parking aide, as it actually works in the direct oppposite way to that of a 'line. Ours turns the rear wheels THE SAME WAY as the front wheels... the hondas turn the opposite (tighter turning circle). With ours the car kinda 'side-steps' across the road slightly rather than having to turn and lean the car over.

Edited by Samon
Really? It really shouldn't make any difference whatsoever. The HICAS is designed to only kick in at higher speeds (i.e. 70km/h+ iirc), and doesn't move under that (unless you're parking at some serious speeds! :thumbsup:)

The 4WS system on the Honda's is designed as a parking aide, as it actually works in the direct oppposite way to that of a 'line. Ours turns the rear wheels THE SAME WAY as the front wheels... the hondas turn the opposite (tighter turning circle). With ours the car kinda 'side-steps' across the road slightly rather than having to turn and lean the car over.

Can you explain why my car steered like a forklift when going around a roundabout when hicas was still fitted and working. And no i wasn't going anywhere over 30ks round the roundabout.

Really? It really shouldn't make any difference whatsoever. The HICAS is designed to only kick in at higher speeds (i.e. 70km/h+ iirc), and doesn't move under that (unless you're parking at some serious speeds! :P )

The 4WS system on the Honda's is designed as a parking aide, as it actually works in the direct oppposite way to that of a 'line. Ours turns the rear wheels THE SAME WAY as the front wheels... the hondas turn the opposite (tighter turning circle). With ours the car kinda 'side-steps' across the road slightly rather than having to turn and lean the car over.

Pretty sure they turn the opposite way to the fronts to go the same direction as they are in the other end of the car. If they turned the same way it would make the car very scary to drive, by making it slide more. The tyres would be on a greater angle away from the direction of travel. As the car goes around the corner they turn the opposite way to make the tyres point in the direction the back end wants to slide in, therefore keeping more traction. I hope my explenation is understandable, it makes sense in my head.....

Pretty sure they turn the opposite way to the fronts to go the same direction as they are in the other end of the car. If they turned the same way it would make the car very scary to drive, by making it slide more. The tyres would be on a greater angle away from the direction of travel. As the car goes around the corner they turn the opposite way to make the tyres point in the direction the back end wants to slide in, therefore keeping more traction. I hope my explenation is understandable, it makes sense in my head.....

It does different things depending on the speed you're traveling...

Performance%20Tuning%20Systems%20HICAS%20explanation.jpg

As you can see from that diagram (from Nissan USA)...

Low speeds: HICAS does nothing... disabled

Medium speeds: rears turn the opposite way to the fronts at first (i.e. tighter turning angle), then once the HICAS computer detects that the car is responding to the turning, the rears turn back the opposite way, slightly reducing the turning circle but improving stability (i.e. theoretically less body-roll because it is kinda 'crab-walking' across the road rather than rotating around a center axis).

High speeds: rears turn the same direction as the fronts, like the second stage of the medium speed above.

I'm not sure of the official values for low, medium or high speeds though.

why the hell does it make the car heavier at low speeds then?

Hmmm... I dunno! It may depend on what they class as "low speed" and what you class as "low speed". i.e. if it's actually classified as "medium speed" then yeah, without it it's gonna feel a lot heavier... I'd love to throw my car up on a hoist and play around with the steering at different 'speeds' to see what happens...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...