Jump to content
SAU Community

Recommended Posts

I got my r32 gts-t a few weeks ago. As soon as I got it I took it to the mechanics and spent about $1000 on it.. I just asked him to look all over it and find the main issues and fix them. He ended up doing a major service, replaced old fuel lines, replaced the timing belt, 'bushings?' or something (to do with the brakes).. but ANYWAY the point is he looked over it and got the major problems fixed.

But now there are other problems with it. Nothing really major, and I could easily live with it, but they're annoying and I want to fix them.

The problems:

- It spluttering at about 4000 rpm.. Its like the power is cutting in and out or something.. mainly happens when the engines cold. Sort of gets better when it warms up

- It backfires a lot.. is it running rich or something? .. should I get a new ECU/ remap

- It stalls if I'm going slow enough and at low enough revs.. For example when I'm rolling into the petrol station.. looks really cool :thumbsup:

- It struggles to turn on when its cold. I need to help it turn on by revving it

- Feels weak after about 4000 rpm.. most due to the spluttering. but even when it isn't doing that it just has no go after then.. I dont know if it's just because it's a 2 litre, but it just feels unhealthy and weak.. like it's really struggling in the high revs

About the 'spluttering'. The mechanic told me my BOV was leaking and if I fixed that it should fix the problem. So I went and bought a new turbo smart BOV, put it on and it did make the car run better... but it still 'splutters'..

So yeah. any help would be appreciated.

(By the way I accidentally posted this before I was finished. Thats why it was only half a message before)

Edited by flth32
Link to comment
https://www.sau.com.au/forums/topic/211056-a-few-problems-with-my-r32/
Share on other sites

You should never be revving a cold engine to 4000rpm.

Did you replace the sparkplugs? if that doesn't help it could be coils.

Is the TS bov plumb back?

No I don't think the spark plugs have been replaced, just cleaned. I'll try that.

And no it's a vee-port BOV (atmospheric). I actually asked the mechanic before I bought it, and asked will it being atmospheric cause problems and he said no.. obviously thats the problem though isn't it (with the stalling)

Edited by flth32
- It spluttering at about 4000 rpm.. Its like the power is cutting in and out or something.. mainly happens when the engines cold. Sort of gets better when it warms up

when the car is cold it will run in 'rich and retarded' mode until the temperature reaches normal. you'll get flat spots and fuel cuts. this is common.

if it's happening even when the car's warmed up then it may be a fuel cut due to lack of fuel or leaning out.

have you got an aftermarket fuel pump? what boost are you running?

- It backfires a lot.. is it running rich or something? .. should I get a new ECU/ remap

sounds like she's running rich. re-tuning the car will stop this once you set a nice A/F ratio.

wouldn't worry about it too much for the moment, it's better running rich than lean.

- It stalls if I'm going slow enough and at low enough revs.. For example when I'm rolling into the petrol station.. looks really cool :banana:

have you blocked off the standard bov? is your aftermarket bov too tight? does it flutter?

having a blocked bov will cause it to stall. it doesn't catch the idle in time and just cuts out.

- It struggles to turn on when its cold. I need to help it turn on by revving it

does it crank over and start spluttering for a couple seconds, until the engine pulls the revs up?

this may be due to the heat range spark plugs you use or the viscosity of the cold temp for the engine oil you use.

what spark plugs and engine oil do you use?

- Feels weak after about 4000 rpm.. most due to the spluttering. but even when it isn't doing that it just has no go after then.. I dont know if it's just because it's a 2 litre, but it just feels unhealthy and weak.. like it's really struggling in the high revs

if it's leaning out up top it may sound like it has no balls, but the RB20 usually has most of it's power up top. dyno tuning the car will show why it feels like crap up top.

Edited by dmr
when the car is cold it will run in 'rich and retarded' mode until the temperature reaches normal. you'll get flat spots and fuel cuts. this is common.

if it's happening even when the car's warmed up then it may be a fuel cut due to lack of fuel or leaning out.

have you got an aftermarket fuel pump? what boost are you running?

sounds like she's running rich. re-tuning the car will stop this once you set a nice A/F ratio.

wouldn't worry about it too much for the moment, it's better running rich than lean.

have you blocked off the standard bov? is your aftermarket bov too tight? does it flutter?

having a blocked bov will cause it to stall. it doesn't catch the idle in time and just cuts out.

does it crank over and start spluttering for a couple seconds, until the engine pulls the revs up?

this may be due to the heat range spark plugs you use or the viscosity of the cold temp for the engine oil you use.

what spark plugs and engine oil do you use?

if it's leaning out up top it may sound like it has no balls, but the RB20 usually has most of it's power up top. dyno tuning the car will show why it feels like crap up top.

Thanks for that man.

I'm not sure what spark plugs I've got (so yeah they did get replaced by my mechanic, but I dont know what brand they are...how can I find out.. ask my mechanic??). What engine oil should I use?

And I think the previous owner put an aftermarket fuel pump on. This is what he said but I don't actually know.. could this be causing problems?.. The spluttering?

Edited by flth32

Oh dear.

For starters R&R has nothing to do with cold start.

If the issue occurred after you got your car back from a professional mechanic... take it back, and make him FIX the issue that he caused.

Did you happen to purchase the BOV through him? :banana:

Edited by GeeTR
Oh dear.

For starters R&R has nothing to do with cold start.

If the issue occurred after you got your car back from a professional mechanic... take it back, and make him FIX the issue that he caused.

Leaking bov eh?

I like the leaking BOV comments lol

Technically speaking it does leak :banana:

so u spend $1000 and didnt even get new spark plugs?

No, my bad. I actually did get new ones (I don't know why but I just thought I didn't).

And no unfortunately I didn't buy the BOV through him otherwise I'd ask to swap it for a plumb back one.

Thanks everyone I think I know the reason for most of the problems now..

Backfiring - running rich.. new ECU/remap

Stalling - loosen BOV or get plumb back

Top end - Maybe get it tuned down the track. Doesnt bother me enough right now

Still don't know about

'Spluttering' - thought it was plugs but I've got new ones. Could it be fuel pump (I think theres an aftermarket one on).. or maybe coil pack?

Struggling to turn on - this isnt that bad. Just weird and makes my car feel broken and crummy. Would be good if I could find out what it is

Thanks for that man.

I'm not sure what spark plugs I've got (so yeah they did get replaced by my mechanic, but I dont know what brand they are...how can I find out.. ask my mechanic??). What engine oil should I use?

And I think the previous owner put an aftermarket fuel pump on. This is what he said but I don't actually know.. could this be causing problems?.. The spluttering?

i personally use Motul Turbolight, and so do alot of other RB/SR motorists. best all rounder, and only costs ~$50 per 5L.

the spark plugs may also cause the spluttering. if the gap is too big then boost will blow out the spark, causing a misfire/splutter as FATAZZ said. try using NGK BKR7E or BKR6E. they're my personal fav. i've tried BCPR7ES and BCPR6ES but didn't like them as they caused my car to slightly misfire.

your mechanic probably put NGK iridiums, as most mechanics like to make you spend the extra dollar if you don't know what's best. iridiums are crap and waste of money. stick with copper plugs.

hope this helps :teehee:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...