Jump to content
SAU Community

E-manage + automatic...

strutto

By strutto,
in Engines & Forced Induction

 Share

Recommended Posts

strutto Grand Master

strutto

Posted
Posted

Can anyone elaborate on the limitations of the e-manage when used on an automatic series 1 r33 gts25t.

I have read that you cannot use the ignition control harness on automatic Nissans. Why is this so? Will this be fixed by Greddy in the future?

I assume it is still possible to control the afm and injectors successfully.

If the ignition control remains unusable on an auto, would an exhaust cam timing wheel offer some benefit?

Link to comment
https://www.sau.com.au/forums/topic/21108-e-manage-automatic/
Share on other sites
strutto Grand Master

strutto

Posted
  • Author
Posted

Taken from the sticky e-manage thread in Forced Induction Performance:

Originally posted by Dr_Drift

Hey guys Just thought I'd share my experience with e-manage. The only significant limitations I've found so far is that you cannot use the ignition control harness on automatics, and the speed limit as previously mentioned.

I've read something about melted coil packs as well. It may have been on the Yahoo e-manage group.

I don't think it affects other ECU's (ie Motec). I think it is just an e-manage issue with auto Nissans. So auto Supras should be OK...

The Dr knows all about this stuff.... Maybe he can elaborate?

skylineakt Rising Star

skylineakt

Posted
Posted

I remember Dr Drift saying something that this is one of the limitation of the e-Management with Skyline. That's it doesn't work with the ignition harness or something.

Would be intresting to find out, cause I was thinking of installing the e-Management as well with my auto. No chance with the Power FC and the HKS F-cons with auto. Motec might be too expensive, my mechanics also mention Links Computers but don't know how good they are. Also Unichip but don't know if they will work with auto either.

Damn auto!! hehe :P

Dr_Drift Veteran

Dr_Drift

Posted
Posted

Strutto - Thanks for the PM...

Here Goes....

It appears that the automatic's wiring in nissans do in fact read the RPM signal from somwhere (haven't investigated where yet).... This signal going through some extra wiring to the auto control unit causes some minor electrical interference. This interference is picked up when trying to tune the e-manage. I assume this is due to the e-manage being more sensitive than the factory ECU. I am also assuming this is the same reason that neither FC's or FCONV's are available for automatics (maybe link's aren't either)??

My problem so far is that I have only tried tuning e-manage (not fitted by me) on one automatic car which was severly accident damaged by the owner a week after my initial attempt. The car has since been repaired but I think the owner is no longer looking for the extra power.

I have had several suggestions on how to rectify this problem, ranging from resistors inline with certain wires going to the e-manage which have RPM based signals (CAS, IGN, INJ), and to also try and run shielded wiring for the emanage.

All the other ECU's I've seen run shielded wiring right up to the ECU which the e-manage doesn't, so this would be the first place I would look.

Skylineakt - As far as fuel tuning goes the E-Manage is excellent, and a much better option than an SAFC or similar.... Perhaps you would be interested in a discounted supply/install and allow us to research this problem further on your car? Worst case scenario is that you have more power with a perfectly tuned fuel curve... Best case scenario is that we will discover how to maximise the potential of the e-manage for all our skyline brethren the world over???

Doc.

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Yet another RB Neo misfiring thread after reading all the others.

      By GTSBoy · Posted

      Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      Nah, I definitely do that kind of stuff with my car. I do drive it around as a daily! It's just that mindset about building a car to actually still use/retain it's function as a car is rare. If you modify your car into a weekender, IMO you've ruined 5/7ths of the fun. It should remain fun to do daily errands in.
×
×
  • Create New...