Jump to content
SAU Community

Recommended Posts

Hi all.

I recently got into a car accident. Maybe some of you have been through this so advice will help.

Long story short. I rear ended a white 2000 hatch model corrolla. It was at low speed approx 5km/hr. The damage to his car was a circular crack about the size of a tennis ball to his rear bar. that was all.

It was pretty much my fault. I spoke to him and he agreed to deal with it privately. Next thing you know I get a letter from his insurance company asking for $1900. Do you guys think that is roughly around a fair price? According to the quote he's repainting both rear quater panels, replacing the rear bar and reo as well as many other miscelaneous things.

I really dont believe it'd cost that much to repair the minor damage.

What options do I have? I'm pretty sure i'm entitled to an independant quote. But does that mean i choose a panel beater for the quote or?

Thanks guys ... its doing my head in -_-

Edited by chinkeboi
Link to comment
https://www.sau.com.au/forums/topic/211177-legal-advice-please/
Share on other sites

If he has issued you with a letter ring your insureance company now! I mean pick up the phone this second. Pay your ecesss & let them deal with it. Its not worth lossing sleep over, that why you pay insurence.

sorry ... forgot to mention that i only have third party fire and theft.. and if you've had experience with justcar.. i'm pretty sure you'd know that i am really reluctant to go through them.

my excess is a few hundred short of what he's asking for..

and jsutcar charge through the roof as it is

ok an honest description of the damage to his car.. a tennis ball sized circular dent which goes in about 2-3mm and has cracked the paint. this is on the right centre of his rear bar..

the rear bar so popped out A LITTLE on the right side.. so that there was a .5mm-1cm gap only on the right side of his rear bar where it connects to his rear quarter panel.

So in all of this.. i agree with the replacement of the rear bar.. most likely the reo was dented.. and since he's milking it.. he would probably replace it... but there was absolutely no damage to the paint of any other panels..

yeah.. in hind sight thats what i should have done

so tip for those out there TAKE PHOTO'S OF DAMAGE AT THE SCENE OF THE ACCIDENT

also.. try and get the other guys reccount of what happened on paper.

its just abit sudden.. ur crusiing along and then crash.. ur world gets thrown around and u forget to do silly little things like that -_-

and since he's milking it..

If you got a letter from his insurance company that it might not be him that is milking it. I think your lucky, my brother hit a Magna in the tail, similar amount of damage (from my brother's description anyways...) and the cost of fixing that was like $5,000, or $1,500 for the excess. At least you had the sense to drive a car WITH insurance.

yeah..

HOWEVER.

the bill is for 1700 (for some reason the front page on the demand letter isn't inclusive of gst) and my excess is $1800

Sometime's I wonder. Justcar is the single biggest rort int his country. technically its only uses are if you cause more than about $2000 damage. Anything less and your kidding yourself by paying $1000 a year for their shitty service.

Well update: I've managed to get a a hold of some photo's of the guys car from his insurance. Looks worse than i remembered it to be.. but then again i was a little hazed going from cruising to get a feed in the morning to a $3000 car crash

Not sure if i can even dispute it.

Load of shit.. $500 MAX!!!!

I just got a quote for a respray for the GTR rear bar because I had some idiot ran into the back of me yesterday afternoon.. nothing broken or dented just scratches.. Asshole :down:

mm chicks driving gtrs thats what you get :P

I have been in the same situation.. we planned to dispute outside of Insurance, next thing i get a letter from the bitch's insurance crowd demanding money.

For a celica front bar that just needed to be popped out, apparently her headlights and reo needed to be changed (and they werent even dented/broken - i saw them after it was all removed).

$1850 later (thanks justcars).. some bitch has a brand new front on her celica and im eating bread and water for a month.

If ANYONE hit my car I would always put it through insurance, for exactly the reasons we are reading here. Dealing with someone who thinks they know how much it should cost, is not my problem.

5km/h inpact can cause panel damage and plastic bars hide damage. We can assume that he might be ripped off, but the end of the day he will have to pay up or be sued by the insurance company, that will costa heap more.

Learn to either not hit cars, or find cheaper insurance excess.

It would not be hard to find $1800 damage,

If you damaged the rear bar reo, good chance the beaver panel got damaged and

Could have also damaged the boot floor if the skyline is low and you went under the corolla,

If this is the case some Toyota corolla beaver panels join over the rear

Qtr panels and can easily just split the seal between them, then Painting of the

Rear qtr would be required,

Then to paint the Qtr would need to remove the rear Qtr windows if it has them depending on which model, sedan or hatch?

Then parts need: Bar ,Reo, Bar mounts, under the bar there are qtr vents these crack easily, Sealer kit for windows, Any badges, possible Exhaust damaged?

And there you have it $1800 gone….

Man that still sounds steep, do what I do in future, keep a digital camera in the car(so you can check the photo is good) and yeah if anyone ever asked me to dispute it privately I'd say no. It's a hassle I don't need that's why we pay insurance every year :)

True comments guys. I would have put it through insurance too. No offence to you, but in her eyes you could just pay a mate to do a dodgy patch up job and send her on her way. I dont know you therefore do not trust you, im paying for the trust of the insurance company. Its just unfortunate bad luck man.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...