Jump to content
SAU Community

Recommended Posts

Didnt mean to create another thread, but thought i start with a clean one!!

Plus this thread will have all the details.

Edit:

Well got it dyno'd at 196.2kw at 10psi

Which i think is pretty damn good for 10psi!!

Will upload dyno sheet later on in the night..

------------

Anyways more details thru out the thread.. read below

Edited by siddr20
Link to comment
https://www.sau.com.au/forums/topic/211348-toshi-remap-done-r33-gtst/
Share on other sites

Was there with Sidd today to undergo the remap, quite interesting to see and learn how he goes about this. Very friendly person and i think he would top one of the customer service experiences when it comes to the service he provides. If I still drove a GTST and was looking for a remap, definitely put toshi on the cards without hesitation.

We are still yet to have the remap done due to the timing problems experienced. Sidd will be getting his timing re-checked by another gun and we will see how it goes from there.

J

yeah would be interesting to follow up....

but Ive always been on the thought of the dyno is a tuning tool..

Sid, please post up dyno results if you do get them.

would be interesting to compare against other members etc

Alright everybody i got my remap done today and am i just amazed!!

I honestly think this remap is equal to a power fc tune with same mods. I have driven a 33 with same mods as mine tuned on a power fc, and it feels the same!!

The work started today at 10.30am and finished about 3.30. Thats 5 hours worth of work (plus the hour or two i spent the day before) and toshi did not ask for any more money!!

I must say his service is just excellent and he truely knows a lot in terms of tuning.

So i highly recommend this remap to any other r33's out there with similar mods as mine (will list them later on).

For 400 bucks i have to say its worth it!!

gonna go have some lunch now, so brb.. lol.. will list my mods plus how the car feels!!

Edited by siddr20

^ yup thats what im about to explain.

I didnt have lunch, so i was starving hense why i left some details out and ended the above post.

Alright well.

i got the road tune done and i now know why toshi recommends it more than a dyno tune at first.

Firstly he put a new map up for me, and 2nd and 3rd gear FLEW!! I was so amazed im like lets work on this map..

But then i went up an hill in 5th gear and the car just wasnt going past 2000rpms.

So basically if i was on a dyno with that same map he probably wouldnt have known about that 5th gear issue as you are only in third gear on the dyno.

Road tune seemed much better as he could adjust the map thru out the rev range in the gears, while still looking at the air fuel ratios.

I was driving the car the whole time while toshi was on his laptop in the passenger seat.

Its not difficult to do the road tune, unless you have some crazy mods etc. Then he probably will have to spend more time adjusting the map..

My mods are:

- Full exhaust

- R34 side mount

- Bigger Fuel pump

- more boost

Before remap the car has been dynoed at 183kw.

Maybe on tuesday i might head down to my local tuner shop and get a dyno done to see the difference.

Im guessing its close to 200kw if not a little more.

--------

My air fuel ratios are in the 11 range peaking at 11.8 at full power (that is 6000-7000rpms).

At about 4500rpms its about 13 at most.

Now hes happy to change the ratios upon your request.

The only advantage about the dyno tune is that you can adjust and make the air-fuel ratios a bit more smoother in terms of the curve. But wont make any difference in terms of power..

I can always get that done a bit later on.

So having my ratios about 11.5-11.8 is pretty much spot on i guess.

------------------

How does the car feel?

BLODDY QUICK!!

A lot of power from 4000rpm. 2nd and 3rd gear pulls so much harder than ever before.

1st gear is just crazy as it revs out so much quicker.

Im not experiencing any flat spots anymore either..

Edited by siddr20

Things to check/do before going to toshi (will make his life easier and yours)

1) Check that your ignition timing is at 15. If not, try and fix it lol... OHH 15 is recommened for Rb25s. So check your engine first and sus it out.

2) Tell him exactly what mods you have and most importantly which fuel pump and how much it flows (need to know in order to adjust the map properly)

3) Make sure your boost guage works and set it at the right boost before tuning.

4) Tell him what your intentions are for the car. Do you do more track days than everyday driving? Is your car just for street. Is your engine old - so tune it so its not harsh.. etc etc. This makes it easier to adjust the ratios and get the right map for the car.

These are just some of the questions that he will ask/check.

Edited by siddr20
  • Like 1

But dont worry everyone, i will get my car on the dyno soon and post up before and after results.

If you want before, here is the graph:

BEFORE:

post-12579-1206254470_thumb.jpg

AFTER:

post-12579-1206430140_thumb.jpg

^ note only at 10psi or so

But i dont think these two graphs can be compared.

Before was done at a cold night..

After seems like higher IT temps..

Meh im happy with it..

Edited by siddr20
Things to check/do before going to toshi (will make his life easier and yours)

1) Check that your ignition timing is at 15. If not, try and fix it lol..

HOW??

2) Tell him exactly what mods you have and most importantly which fuel pump and how much it flows (need to know in order to adjust the map properly)

HOW can I tell the flow rates??

These are just some of the questions that he will ask/check.

Cheers

subie - Get your self a timing gun. Basically its a gun that shines light down near the harmonic balancer which reads out the timing (You should see the strobe flash in time with the engine). Each mark you see is 5 degrees. But go to any work shop and they will be able to check. Only takes 2mins at most.

If its not at 15, then you will have to adjust your crank angle sensor!!

In regards to your fuel pump - well if you know which model it is then just look it up. I bought a walbro one which flows at 255L/PH?? So its bigger than a stock gtr pump (185)

Edited by siddr20
subie - Get your self a timing gun. Basically its a gun that shines light down near the harmonic balancer which reads out the timing (You should see the strobe flash in time with the engine). Each mark you see is 5 degrees. But go to any work shop and they will be able to check. Only takes 2mins at most.

If its not at 15, then you will have to adjust your crank angle sensor!!

In regards to your fuel pump - well if you know which model it is then just look it up. I bought a walbro one which flows at 255L/PH?? So its bigger than a stock gtr pump (185)

might get my mechanic to check the timing and i have the same fuel pupm as u mate

cheers

^ no worries. ah just be careful as theres two types of walbro pumps!! Just double check the model number

Mr_G just took my car for a spin :D

I will let him explain how it felt :D

AS hes driven my car many of times!!

Edited by siddr20

Just took Sidds car remapped for a drive, and definitely has alot more in the midrange and top end which felt great! Im an s15 driver and have alot of work done to mine, so its pretty hard to compare against my car, however it probably feels like a 200rwkw car in my opinion, we have to wait to get it on the dyno and have a look but for $400, its been a huge improvement to the driveability and tune in Sidd's car and can honestly recommend the value of this to be better than a pfc.

To fine tune it, Toshi can meet you at a dyno I believe so he can play around with it? But honestly for what it is, you cant go wrong :D

Thumbs up to Sidd and Toshi :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...