Jump to content
SAU Community

Recommended Posts

I am not sure about Ethanol. Some say that it is actually good for the car (small amounts) and some say that you don't need it and can be harmful to engine.

Does BP have ethanol in their petrol? I know Shell advertise that it doesn't contain any ethanol.

Way back before the dawn of time (I.E. Before SAU started and we were all in SDU) someone took the inititive to test all 3 fuels and in terms of the RON ratings they were all pretty close with no major winner between the 3 of them. BP was first, then Mobil 8000 then Optimax. All over the 98 RON mark.

What was more interesting was the chemical content within the fuels. I can't remember what contained what but Optimax had other additives and stuff. I think it was supposed to be a bad thing but don't quote me on that.

I've since tried to find the thread but it's gone to Thread Heaven... :P

However I feel that you should stick with what you think. All 3 aren't bad and it's not like your going to gain massive HP by running [insert fuel brand here]. People have had different experiences with all fuels some run better on this, others on that.

I use whatever I'm closest to when I need to fill up, but generally have gone for Optimax. Ive found through the 3 main ones that Ultimate seems to give me good fuel economy, where Mobil gives me good performance and Optimax is a combination. Like a good all-rounder... I have noticed that results on Optimax tend to vary from servo to servo sometimes, but if you find a good one stick with it.

Man BP Ultimate is pretty hard to find in my area!!

Drove into 2 BPs and one had premium unleaded and the other just had unleaded. Look like a fool driving in and driving off haha. I think I found one for sure now with BP Ultimate, but still haven't try it out yet.

i tryed bp and vortex and my car didnt like em at all

ive been told by many that these are the best and have highest octane etc

but for sum reason my line didnt take to it very well

ran much better with optimax

:confused:

I manage a caltex servo on the Gold Coast and it has the worst premium grade fuel I have used :D I never use Caltex Vortex it doesnt have the RON of the other brands... You can tell by the difference in price between the unleaded. Vortex is generally 5 cents dearer than unleaded at Caltex, BP ultimate is generally 8-10 cents dearer !!! I only run ultimate where possible, If I cant I use Optimax.... These two give better mileage which offset the extra cost.. Never really liked Mobile after all the deal with the aviation fuel getting diluted in our petrol so I havnt tried them! The other good thing to do is run Nulon petrol treatment.. by far the best. Its a red container.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
    • Light should be a pressure switch, not a sensor.
    • The pressure light likely has a different sender to a pressure gauge, its been too long for me to remember for sure. Just have a look for another sender down near the oil filter. If you are confident in your rewired pressure sender reading correctly, you can be pretty sure it is just the dash light's sender failing, it is a pretty common thing.
    • It would be nice to see the result, but instagram is a click too far
    • That is a series 1 front end (grill, bumper, headlights). I'm not sure if you are trying to confirm if your whole car is series 1 or just the headlights, but the build date and vin# on the plaque in the engine bay would be the best reference for what it was when it left the factory (noting a lot may have changed over the years)
×
×
  • Create New...