Jump to content
SAU Community

Recommended Posts

If it's green, it'll be your coolant (I can't think of anything else that's green). Is it leaking from where your heater connections are (on firewall)? Sorry, but I don't know where the starter motor is. :)

Edited by adam-__-

mate sounds very much like the water hoses that run under the inlet manifold and go right around the back of the cylinder head.If I were in your shoes find a good workshop to replace all these hoses as if one is dead then the rest are only weeks behind.They are a nasty thing to replace too. I did a couple myself but that one that runs behind the head is REALLY difficult.Best to put it up on a hoist, may need to pull starter motor out to get to it...IT really is that nasty, maybe you might get lucky and find a double jointed mechanic....

ive changed those hoses myself it is a bit of a bugger the most usefull tool i found was a really long pair of pointy nose pliars about 12 inches long .

they allowed me to reach the hose and get the clamp off as well as lever the hose off the pipe

As stated earlier if its around the starter motor its more likely to be the short hose the connects the coolant pipes under the plenum its right above starter ,I had this exact same problem once and was a prick to replace took ages to find it .

Guys,

all fixed today, went to my mechanic this morning and found those straight little hose (just about the size of ur thumb) was splited and the cooling pipe that connected to this hose also broken

thanks for all ur inputs guys

Cheers

Edited by subie
  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...