Jump to content
SAU Community

Recommended Posts

yep thats the one i was thinking of but how long b4 the rest of the docks get built on ?

i live 13 ks from speedway city and on a quite

night i can hear the sprint cars and thats over land noise travels really far over water and i think it wont be long b4 residents start whinging about the noise .

remember this complex will be there a long time and the developments will move closer and closer exactly the same thing happened to air and speedway city we have to make sure the same thing does not happen to a new complex we need to think of the long term solution not just build it and see what happens in the future it will be to late then and curfews will be put in place

rowley park speedway closed due to noise

speedway city and air curfews placed on them

murry bridge speeway curfew placed on them

timmis speedway mildura curfew placed on then and dozens of other tracks around the country you see where im going with this

Edited by mid life crisis
  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

yep thats the one i was thinking of but how long b4 the rest of the docks get built on ?

i live 13 ks from speedway city and on a quite

The above phase goes until about 2018... and that stretches from the bridge under construction through to the old wharf and further away from Garden Island. So at the moment they don't have plans building any closer to etsa power facilities and garden island... and you'd still be looking another decade or more away at least. They'd first probably have to move the power facilities if they were looking at expanding newport down that way.

i still feel that noise would be a issiue even if the complex was built tomorrow with housing as it is right now .

dont get me wrong i am all for a new complex like kiawanna in wa not sure if thats correct spelling . i just dont want to restrictions placed on it right from the start

and if there is housing planned where the new bridge is thats not very far at all as the crow flies from garden island at all .

all we have to go on is what has happened to other tracks in the past and i feel the same thing will happen to a ne complex at garden island i just think it's too close to housing as it is .

it's like the people who have build houses at north haven on the marina then they yell at you at 4 in the morning when i launch my boat lol cause they dont like the sound of outboards

Edited by mid life crisis

ummm.. that article is from February 14, and was the one that was linked in the original thread. This was before the Rally which lead to this news article going ahead. There is nothing new here, so we'll have to wait and see.

I hear your concerns loud & clear mid life and tend to agree that its a major concern.....surely the mayor & consortium of developers would be discussing that very issue, you would hope.

I would think these boys wouldn't want to fork out 25 mill (which will probably become 35 mill) to have restrictions imposed down the track.

Hopefully they have a really good think tank in progress before they start pouring.

PS: Thats probably the most typing in 1 day I've ever seen out of you mid life........time for a lie down and a bex buddy (washed down with some camomile or scotch) :ermm:

I don't care if they place say 10pm curfews - better to drag locally until 10pm, than drive out to the middle of nowhere, where it takes an hour travelling time each way, then if you bust or need to replace something you have to pay mega-bucks for a tow etc etc.

I can't see noise impinging on any existing houses, and people who plant o move to the area just need to be aware that there will be noise, and not bitch and moan about it. I take your points mid life crisis - people who whinge about boat noise should not have built on the water .... that is like building under an air route and then complaining about the noise (which I know people in Richmond did - idiots).

I don't care if they place say 10pm curfews - better to drag locally until 10pm, than drive out to the middle of nowhere, where it takes an hour travelling time each way, then if you bust or need to replace something you have to pay mega-bucks for a tow etc etc.

I can't see noise impinging on any existing houses, and people who plant o move to the area just need to be aware that there will be noise, and not bitch and moan about it. I take your points mid life crisis - people who whinge about boat noise should not have built on the water .... that is like building under an air route and then complaining about the noise (which I know people in Richmond did - idiots).

Andrew you know better than to expect that, you only have to look at Sanddown in Melb, live music venues in city's, airports shifting out, etc, etc.

People move in, whinge, and noise-makers are forced out.

Look this is all very exciting but until I see bulldozers I'm not getting my hopes up.

I say order all those who whinge about noise a whaa-mburger and cries - I support the closer venue and the fact you don't have to faff about transiting for over an hour to get to your destination to 'be a hoon' and enjoy your car in a legal environment costing you $$

What does it matter if there was a curfew on it anyways, As Ash has stated at Sandown when we went we couldn't start our engines(race cars) until like 8:30am because of houses pretty much on the boundary. When have you been to Mallala and have been watching racing OR drift when it has gone past 10pm or thereabouts. Your seriously NOT going to be going to a drag strip at 2am in the morning are you!1 or are you gonna be fully sicked out cruising down Hindly St at 1am in the morning and confront a random tool that wants a drag and you say "look mate the track is down at Pt Adelaide, lets go there for a drag" and then get there and make someone turn the lights on down there for you at a 27+ million dollar venue!! Not gonna happen!!

i think so off you are blinded by the fact that someone wants to build a new complex im rapt and want it to happen as well .

but there is nothing worse than paying ya money and ive had this happen to me a few times so i know what im on about when ya get to the track u usually have been working on all week to get it there say its drag night for example the meeting starts you have paid ya dough the meeting falls behind scedule due to a crash or a oil down and b4 ya know it ya pushing ya car back on the trailer to go home cause the curfew as been inforced .

so youve worked all week on the car paid ya dough and due to something happerning that holds the meeting up for a while you miss out not much fun in that i can tell ya

Thats happend many a times to us in Sprint Karting, Superkarting and in IPRA, Last race of the day gets scrapped or cut down in laps, not much you can do about it, besides the flaggies, marshals and Ambo people cant be out there all day including a extra 2 hours because a meeting has run overtime!! It's just bad luck i guess, and in circuit racing its up to us to stay off the track if we've blown something so generally if that occurs we all go out on the track and help with the cement dust!! I guess thats just life, not much you can do about it!!

Oh well, we live in a far from perfect world, will be good just to have a track again!!

:rant:

The noise emitted will be the biggest hurdle. But there are ways around it.

I just hope this new strip allows even runs for motorbikes too. I always got frustrated with watching the same cars run thru 2-3 times before the bikes got to play. We pay the same as the car entries, and we're quicker anyway! Cars would get like 10-15 runs on a busy night, and we got 5-6! On a good night we'd get maybe 9. We always had arguments with the officials on this one many times :)

I hear ya both Deluxe & Mid Life and in a perfect world we need a track without curfews, but at the end of the day if a track without curfews becomes a prerequisite to getting one, then bring on the curfews because ultimately this state must get an all in one circuit. We're already seen as a joke state by melbournians.

I hear ya both Deluxe & Mid Life and in a perfect world we need a track without curfews, but at the end of the day if a track without curfews becomes a prerequisite to getting one, then bring on the curfews because ultimately this state must get an all in one circuit. We're already seen as a joke state by melbournians.

:rant:

And lets all hope they're smart enough to at least orientate the strip west-east. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
    • Dang, those BBS are so nice! 
×
×
  • Create New...