Jump to content
SAU Community

Standered Afms

Adz2332

By Adz2332,
in Engines & Forced Induction

 Share

Recommended Posts

Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted (edited)

excellent thanks for that... so hoping for around 280... mayb 300kws the afms should be fine.... there was someone on here selling 80mm afms with plugs for $300. but if they should get 300 im all good

Because im trying to rulw things out that would stop me from reaching the 300kws mark...

Im guessing the set up will get me around 280kws MAYB 300...

Id love the 300 so just trying to work out what would hold me back...

Edited by Adz2332
Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3743260
Share on other sites
GeeTR Grand Master

GeeTR

Posted
Posted

Taken from PaulR33's site

Rule of thumb for Air Flow meters RWKW & Engine BHP

------ ---- OD ---- RWKW ---- RWKW ---- BHP ------ BHP

No of AFM's ---- ------- 1 -------- 2 -------- 1 -------- 2

RB26 ------ 65 ------ 149 ------ 299 ------ 271 ------ 474

RB20/25 --- 80 ------ 226 ------ 453 ------ 376 ------ 683

Z32 ------- 80 ------ 255 ------ 511 ------ 415 ------ 763

Q45 ------- 90 ------ 302 ------ 605 ------ 479 ------ 890

Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3743460
Share on other sites
Cjmartz2k Proficient

Cjmartz2k

Posted
Posted
excellent thanks for that... so hoping for around 280... mayb 300kws the afms should be fine.... there was someone on here selling 80mm afms with plugs for $300. but if they should get 300 im all good

Because im trying to rulw things out that would stop me from reaching the 300kws mark...

Im guessing the set up will get me around 280kws MAYB 300...

Id love the 300 so just trying to work out what would hold me back...

He was talking about 300hp, not 300kw for a stocker, although I think it's something closer to 340hp or so at the motor.

I think Paul's numbers are a bit off also. I only pulled 4800mv through it at 400rwhp, and I'm ballpark 500rwhp now and pulling 4995mv through it on cold nights. I know it's a 5v sensor, but I've seen people go over that (to like 5100mv) making 530rwhp. I have sucked water into my intake after a carwash before and it pegged it at 5150mv.

Nismoid, what kind of voltage are you pulling at that power level?

Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3743676
Share on other sites
GTR1993 Mentor

GTR1993

Posted
Posted

Are the numbers what you can make approximately when u hit the last load cell, or just what you will pull through the afm, because at the end of the day you can load that last cell up with fuel and will be "fine" and make much more power then it technically can read.

Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3744766
Share on other sites
Sydneykid Grand Master

Sydneykid

Posted
Posted
Are the numbers what you can make approximately when u hit the last load cell, or just what you will pull through the afm, because at the end of the day you can load that last cell up with fuel and will be "fine" and make much more power then it technically can read.

They are my numbers determined in the tuning of well over 40 Skylines since 1999. They are RWKW at 5.1 volts on a properly calibrated Dyno Dynamics at zero knock with circuit racing safe A/F ratios and using 98 ron pump fuel. They do not allow for happy dynos, hub dynos, boost spikes, race fuel, dangerous A/F ratios or smart tuning past 5.1 volts.

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3744824
Share on other sites
Ad_N Collaborator

Ad_N

Posted
Posted

I have an R32 GTR. Air Flow meters are still standard (other parts not standard but as we are talking just afm's didnt feel necessary to list) and on 24psi I am putting out 341kw at the wheels. My tuner is telling me however that the afm's are now at or close enough too their max.

Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3744834
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • bilbo117
      Gtr-registry.com: Now All R32/r33/r34 Gtr Details - Full Registry - Submit Photos/info

      By bilbo117 · Posted

      Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...