Jump to content
SAU Community

Recommended Posts

excellent thanks for that... so hoping for around 280... mayb 300kws the afms should be fine.... there was someone on here selling 80mm afms with plugs for $300. but if they should get 300 im all good

Because im trying to rulw things out that would stop me from reaching the 300kws mark...

Im guessing the set up will get me around 280kws MAYB 300...

Id love the 300 so just trying to work out what would hold me back...

Edited by Adz2332
Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3743260
Share on other sites

Taken from PaulR33's site

Rule of thumb for Air Flow meters RWKW & Engine BHP

------ ---- OD ---- RWKW ---- RWKW ---- BHP ------ BHP

No of AFM's ---- ------- 1 -------- 2 -------- 1 -------- 2

RB26 ------ 65 ------ 149 ------ 299 ------ 271 ------ 474

RB20/25 --- 80 ------ 226 ------ 453 ------ 376 ------ 683

Z32 ------- 80 ------ 255 ------ 511 ------ 415 ------ 763

Q45 ------- 90 ------ 302 ------ 605 ------ 479 ------ 890

Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3743460
Share on other sites

excellent thanks for that... so hoping for around 280... mayb 300kws the afms should be fine.... there was someone on here selling 80mm afms with plugs for $300. but if they should get 300 im all good

Because im trying to rulw things out that would stop me from reaching the 300kws mark...

Im guessing the set up will get me around 280kws MAYB 300...

Id love the 300 so just trying to work out what would hold me back...

He was talking about 300hp, not 300kw for a stocker, although I think it's something closer to 340hp or so at the motor.

I think Paul's numbers are a bit off also. I only pulled 4800mv through it at 400rwhp, and I'm ballpark 500rwhp now and pulling 4995mv through it on cold nights. I know it's a 5v sensor, but I've seen people go over that (to like 5100mv) making 530rwhp. I have sucked water into my intake after a carwash before and it pegged it at 5150mv.

Nismoid, what kind of voltage are you pulling at that power level?

Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3743676
Share on other sites

Are the numbers what you can make approximately when u hit the last load cell, or just what you will pull through the afm, because at the end of the day you can load that last cell up with fuel and will be "fine" and make much more power then it technically can read.

Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3744766
Share on other sites

Are the numbers what you can make approximately when u hit the last load cell, or just what you will pull through the afm, because at the end of the day you can load that last cell up with fuel and will be "fine" and make much more power then it technically can read.

They are my numbers determined in the tuning of well over 40 Skylines since 1999. They are RWKW at 5.1 volts on a properly calibrated Dyno Dynamics at zero knock with circuit racing safe A/F ratios and using 98 ron pump fuel. They do not allow for happy dynos, hub dynos, boost spikes, race fuel, dangerous A/F ratios or smart tuning past 5.1 volts.

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3744824
Share on other sites

I have an R32 GTR. Air Flow meters are still standard (other parts not standard but as we are talking just afm's didnt feel necessary to list) and on 24psi I am putting out 341kw at the wheels. My tuner is telling me however that the afm's are now at or close enough too their max.

Link to comment
https://www.sau.com.au/forums/topic/211845-standered-afms/#findComment-3744834
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...