Jump to content
SAU Community

Recommended Posts

Hey all,

apparetly my ECU in my car has failed froma common fault. Im not overly convinced that it can simply break like this for no reason at all. and before being played into buying a haltech, i was wondering if anyone out there with a r34 auto turbo will be willing to lend me their ecu to fit into my car and to see if things work out fine. ( really dont want to spend 2200 bucks unless i have to)

im willing to pay to borrow it, if no one is trusting enough :)

sorta need asap

thanks guys

Bryn

Link to comment
https://www.sau.com.au/forums/topic/211966-r34-turbo-auto-guys-can-you-help-me/
Share on other sites

What's it done? Not shifting properly? Depending on the issue, a manual ECU might be ok for testing, unless you need to actually drive it to test the problem. I can't help you either way unfortunately but it might widen your options a little :ninja:

Bryn, you're welcome to borrow mine. I obviously need my car during normal work hours, but if you're able to work something out around that, I'm fine with it.

You'll have to come pull it out though. Hell, I need to do an oil change soon, so I'll just do that while you're off playing with the ECU.

Yeah my ECU isn't so stock anymore so is no use.....but Marc is correct you can put the manual one in and everything will work A-OK except you'll be stuck in 3rd

I don't understand why the GTt isn't like the N/A model and has the auto-shift computer built into the actual car not the ECU :S

So who told you about the "common fault" I've never heard of anything go with the R34 ECU's ever, ever, ever....maybe we can diagnose via the internets for you? :thumbsup:

Try calling Markimak or his brother, they've got the ECU from the stacked R34 that they could lend as far as I know, linky, linky

http://www.skylinesaustralia.com/forums/Wr...34-t176434.html

hey, the common fault is that the ignition section of my ECU has failed. so i got warning lights on the dsah and dirty missfiring.

Hacker X thanks for the offer,, sadly my car is at the mechanics still, so they are only open during the hours ya need ya car.

Ill message markimark and see if i he can help me.

thanks

Edited by Silver_R34_GT-T
hey, the common fault is that the ignition section of my ECU has failed. so i got warning lights on the dsah and dirty missfiring.

Hacker X thanks for the offer,, sadly my car is at the mechanics still, so they are only open during the hours ya need ya car.

Ill message markimark and see if i he can help me.

thanks

Sure it's just not the coilpacks???? That's the common fault with R34's not the ECU side of the ignition

apparently they checked all that, and after looking at it they determined that the ecu was giving out the wrong stuff as were random or something (im not very good at technical shit)

the only reason i knew something was wrong was i had the traction control, slip and engine warning light on, they said that the traction control system was turning itself of as it couldnt get a correct reading from the ecu or throttle or something.

:thumbsup: markimark is out of country)

apparently they checked all that, and after looking at it they determined that the ecu was giving out the wrong stuff as were random or something (im not very good at technical shit)

the only reason i knew something was wrong was i had the traction control, slip and engine warning light on, they said that the traction control system was turning itself of as it couldnt get a correct reading from the ecu or throttle or something.

:ermm: markimark is out of country)

Can you PM me the workshop so I may pass judgment :ermm:

apparently they checked all that, and after looking at it they determined that the ecu was giving out the wrong stuff as were random or something (im not very good at technical shit)

the only reason i knew something was wrong was i had the traction control, slip and engine warning light on, they said that the traction control system was turning itself of as it couldnt get a correct reading from the ecu or throttle or something.

:cheers: markimark is out of country)

mine was turning on the same lights. no missfire, ran fine. was setting i think code 24 - igntion signal primary.

i suspected faulty igniter in one coil causing incorrect feedback to ecu, setting fault code.

new set of splitfires, no more lights & idles smoother.

mine was turning on the same lights. no missfire, ran fine. was setting i think code 24 - igntion signal primary.

i suspected faulty igniter in one coil causing incorrect feedback to ecu, setting fault code.

new set of splitfires, no more lights & idles smoother.

Yeah exactly why I think it's been misdiagnosed as the ECU...the packs are 1000000 times more likely to fail and brings up all of the other lights as it causes the sub-systems to fail at the same time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...