Jump to content
SAU Community

Recommended Posts

i doubt there would be a tutorial because tuning a rb20det into a rb20de isnt a common thing to do

it would be much easier to sell what you have and get the na version, but for what ever reason you have to do it then your going to have a slow na rb20

Just rip the turbo off, get appropriate sized bolts and plug up the coolant and oil feeds on the block that use to feed the turbo, then get a na exhaust manfold and then connect that to the rest of your exhaust system.

Then from the inlet manifold get some pipe to go over the engine to the passenger side of the enginebay, connect you afm upto it and then it should be done.

I would adjust you cas and put some more igntion timing into it to regain some sort of performance.

Its going to be slow and bad on fuel for the perfomance you get.

Edited by R34GTFOUR

its a lot of work and money for a stupid result

i know chi is selling an n/a rb25de engine for $500 with intake plenum and headers

would be much cheaper as you need to replace the pistons and gasket to bring the compression up on the det engine

and it would need to be tuned.. just not a good idea

I was looking too to do this to my RB20DET.

What you need is:

N/A exhaust manifold

NA ECU

NA Intake pip (without BOV)

NA intake box

Block oil and coolent lines to turbo from block

Remove SMIC

And I think you also need to play around with the ECU loom aswell :D

This could cost you anywhere up to $500 in parts + Labour or time

Then your cars compression ratio is very low due to to it being set up for a turbo..

Your going to have a low comp. NA 2L. Not pretty. To change this you need to change over pistons..

Put simply.. not worth it.

As said above.. Buy yourself an RB25DE ECU + Loom. Youc an find some pretty good example at a fair price. Then you could always go back to turbo with a 2.5L..

Or drop in a VQ35DE :ninja:

find someone with an RB20det that wants to turbo it, and do a swap with cash YOUR way. You get ur engine, they get theres, you get enough cash to fund the mechanic to do the swap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...