Jump to content
SAU Community

Gt30r Kit To Suit R33 - Sold

BelGarion

By BelGarion,
in Classifieds

 Share

Recommended Posts

BelGarion Grand Master

BelGarion

Posted
Posted

gday.

im selling a GT30R top mount setup. details are

GT30R .63 rear housing - turbo is in good condition, seen around 50 to 60 thou ks

Mild steel manifold - 38mm runners

Tial copy external gate

Dump pipe

external gate piping and front pipe all to suit.

so basicly all your gonna need is a intake pipe from your afm to the turbo and oil and water lines to suit the turbo.

SOLDb]

ill get pics up in the next few days, at the moment i cant find any on my computer.

cheers

edit:- sold

Link to comment
https://www.sau.com.au/forums/topic/213561-gt30r-kit-to-suit-r33-sold/
Share on other sites
BelGarion Grand Master

BelGarion

Posted
  • Author
Posted

i cant give you a torque figure but suffice to say there was plenty of it. last dyno it pulled around 250rwkw on standard internals + or - around 10kw for different dynos.

i know the last time i went to a track day i was runnin outta grip at the end of my last session and started puttin it sideways through corners and was easily smoking the tyres,

PWND Grand Master

PWND

Posted
Posted

depending on whether my shares keep going back up, might give you a call late next week, if it's still for sale.

when did this setup hit boost.

looking for something responsive. peak power is not too important.

BelGarion Grand Master

BelGarion

Posted
  • Author
Posted

to me this turbo was a very responsive turbo.

due to the smaller exhaust housing it was quite easy for the rb25 to spool it.

iirc i usually had full boost around 2.5k - 3krpm

its been a long time since i drove it so i cant remember, all i can tell you is that its a very good match up for a rb25 engine

PWND Grand Master

PWND

Posted
Posted

I would love it, but the budget just can't stretch that far at the moment.

going in on wed for a new clutch and boost controller, and then probably fitting a wolf 3d a week later.

depending on how quickly i bounce back from that, you will hopefully be hearing from me

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 GTR Speedo Drive , sensor type ?

      By GTSBoy · Posted

      It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...