Jump to content
SAU Community

Gt30r Kit To Suit R33 - Sold


BelGarion
 Share

Recommended Posts

gday.

im selling a GT30R top mount setup. details are

GT30R .63 rear housing - turbo is in good condition, seen around 50 to 60 thou ks

Mild steel manifold - 38mm runners

Tial copy external gate

Dump pipe

external gate piping and front pipe all to suit.

so basicly all your gonna need is a intake pipe from your afm to the turbo and oil and water lines to suit the turbo.

SOLDb]

ill get pics up in the next few days, at the moment i cant find any on my computer.

cheers

edit:- sold

Link to comment
Share on other sites

i cant give you a torque figure but suffice to say there was plenty of it. last dyno it pulled around 250rwkw on standard internals + or - around 10kw for different dynos.

i know the last time i went to a track day i was runnin outta grip at the end of my last session and started puttin it sideways through corners and was easily smoking the tyres,

Link to comment
Share on other sites

I would love it, but the budget just can't stretch that far at the moment.

going in on wed for a new clutch and boost controller, and then probably fitting a wolf 3d a week later.

depending on how quickly i bounce back from that, you will hopefully be hearing from me

Link to comment
Share on other sites

 Share



  • Similar Content

  • Latest Posts

    • You won't make it out of your driveway. Both your rear wheels will go in whichever direction they feel. Your Hicas rack or a lockout bar is required to keep your wheels straight. 
    • Updating results.  Using ATR45SS-0 model VS UHF57-900. Those two are very different turbos, different wheels sets with different wheel hub profiles but yet with almost identical result. I’m intrigued with both turbos performance. ATR45SS-0 was a 61mm turbo first developed in May 2020, UHF57-900 was a 62mm turbo developed in March 2024 as a powered up alternative of a G30-900. On paper ATR45SS-0 maxed at 563rwkws, while UHF57-900 maxed at 568rwkws. ATR45SS was slightly more responsive with slightly better power band through the mid range.  Road driving ability, ATR45SS-0 had better throttle response, felt more robust under throttle, as it wakes up earlier. I think G series wheel hub design made it to have higher inertia under light throttle. Doing bit more prototype work in the next few weeks, will update result when its back on dyno again. ATR45SS0 Blue, UHF57-900 Red Chequered tuner's Dynapack hub dyno, E85 fuel. Mod list is in video below video_20240604_114214.mp4    
    • Did you run the power cables for the mac valve to the other side of the car near the fusebox? Utilizing the stock boost controller cables? or did you run new ones?
    • Hey I have a potentially stupid HICAS question 🤣 I'm currently doing a full hicas delete, Power steering pump modified to non hicas, all lines removed from the car along with all electronics. My stupid question is - Do I need a lock out bar? is there any reason why I cant just remove everything from the rear end? I already have a lock out bar but thinking to save a few extra grams I could also get rid of the arms and tie rods as well and just run it with nothing in its place? or would it have a negative effect on handling?
    • Hi how are you guys?  I know i have been absent for years but im coming back slowly guys just wondering if anyone know where the ball joint on the NISMO arm front and rear can be replaced with OE parts?  Also  i know this is not the thread looking for springs and blistein shocks for the 260rs. Please advcie     cheers    yudy
×
×
  • Create New...