Jump to content
SAU Community

Recommended Posts

The ticking sound can usually be rectified with a higher viscosity (thicker) oil. Many cars of all makes with higher kms usually make a ticking sound. Subaru's are especially renowned for this. How many kms on the car and did the ticking occur once you changed the oil?

I doubt it would be your belts as the sound wouldn't go away once the engine is warmed up.

Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3776819
Share on other sites

The ticking sound can usually be rectified with a higher viscosity (thicker) oil. Many cars of all makes with higher kms usually make a ticking sound. Subaru's are especially renowned for this. How many kms on the car and did the ticking occur once you changed the oil?

I doubt it would be your belts as the sound wouldn't go away once the engine is warmed up.

Ah i see, i brought the car at 102,000k and now its done 106,000k. The oil that i used was motul turbo light, is there a way to reduce the noise? I like it when the motor is quiet.. An also i did not hear the tick once the oil was change it was not until weeks after

Edited by gazal
Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3777003
Share on other sites

Reduce the noise by changing the oil to what it was before basically. Also now that we are approaching winter your car will get even noisier on start up. This is normal. You learn to live with it, but you can reduce the noise with the right oil imo.

Don't get 0W-xx viscosity. You don't need it. Good for revving out easy but too thin and by rule of thumb will be the noisiest. If you go by the Nissan handbook, they recommend their patented 7.5W (for everything!), but that oil breaks down easy (semi synthetic). I found Motul 4100 degraded quickly too (also semi synthetic). Motul Chrono 300V was much nicer to the ears and engine. Expensive stuff though. It is a case of sticky lifters/tappets and some cars are more prone than others. In my experience it has been an oil thing and has a direct correlation with the outside temperature as you will notice.

This is just from my experience and of various mechanics recommendation.

Edited by HotPlates
Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3777100
Share on other sites

Cool, thanks for the feedback guys.. So what is it? the oil or the gasket? i dont know much about cars and if there's something wrong i'll take it to a workshop. I rather find out what could be wrong with it so that if i do take it to a workshop i don't come out with a new car..haha

Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3777432
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...