Jump to content
SAU Community

Recommended Posts

hi all, im very new to this forum, i have tried to find an answer to my question but searching

but i couldnt find and threads in relation to it so im just gonna ask it again,

My R33 has recently started to surge, and want to cut out just as the turbo is spooling up,

and sometimes while i am just driving at the one speed, but is worse while accelerating..but only does it

when the engine is warmed up, never does it when it cold.

the best way to describe it is, it feels like its running outta fuel (yes there is fuel in there!)

could it be the igniter packs?

any help would be much appreciated,

great forum by the way!

cheers, craig

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/
Share on other sites

I have this problem after I fitted a electronic boost controller and turn the gain or boost level up. But when I turn the boost level or gain down the problem always goes away. Sometimes with diffrent fuels the problem would come back so I had to change boost / gain levels depending on the fuel. Fo you have a boost controller fitted?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785564
Share on other sites

if it sounds like its popping its probarly the coils

but if it making all the right sounds but going no where then takes off like a bat outta hell

it will be the normal r33 flat spot

most people change the ecu and have it tuned to fix the problem

but there are other ways around this problem it just depends who you speak to

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785608
Share on other sites

Are you running standard boost? If yes then it's not the boost cut.

My advice:

Do a search on-

O2 Sensor/oxygen sensor. Yours might be dirty/dying

AFM. It might need a clean

Spark plugs. Change them

Coilpacks. Wrap them in tape/silicone

Fuel pump. Maybe yours is on the way out. Change the fuel filter too, it's a good idea anyway.

If the problem remains after all those then get professional help. Or a psychiatrist.

Edited by R338OY
Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785641
Share on other sites

as far as i know, the turbo has been a flowed, but seems to now be running less than the standard 7 psi, i only have a manual boost controller under the bonnet, ill change as much as i can, coils, spark plugs leads etc, if it keeps happening, ill just have to take it to morpowa, or boostin oz to get them to figure it out...thanks guys

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785708
Share on other sites

ok, i took the coil pack cover off, gave it a thrash to make the engine hot, it didnt do it, except for when i first started driving (when it was cold)

i got home , turned the lights off to check for a sparks fromk coils, and there was nothing.

i bought some new ngk laser platinum spark plugs that will be going in tomorrow.

could this problem possibly be my AFM?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3789011
Share on other sites

ah ok.. 2 of my friend's r33 had the same problems too

put it on the dyno and check the fuel pressure, might be your fuel pump

may also be fuel pressure reg too, though not very likely. i'd check fuel pump first

coilpack and afm are other possibilities, but if afm's cleaned like i've mentioned in the other post it should be fine

if afm is playing up or dirty your car wont idle properly in most cases

Edited by chiksluvit
Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3789139
Share on other sites

ok, i spent some time under the bonnet yesterday, changed spark plugs (ngk laser platinum) cleaned afm thoroughly and checked/cleaned igniter packs, also wrapped them in electrical tape just in case,

all seems good, no more surging or choking, but this typical r33 flat spot you all spaeak of is now obviuose, doesnt do it all the time, but every now and then when i boost it hard. for now, it doesnt really bother me, it still eats most ls1's so thats all im worried about at the moment ; )

i also took out the bleeder valve beacause it wasnt always hitting the 11-12 pound it usually does, instead it was only reaching 5-7 pound.

it didnt seem to make much difference without the bleeder valve, but does it matter if i leave it out?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3791059
Share on other sites

taking the bleed vavle out definatly wont hurt anything

the flat spot though i know how to fix it without changing the standard ecu

i have done it to my car and many others and has worked everytime

ok...how?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3791145
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did you pay with a credit card? I'd be putting a charge back through then finding a new sparky to sort it out. 
    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...