Jump to content
SAU Community

Recommended Posts

hi all, im very new to this forum, i have tried to find an answer to my question but searching

but i couldnt find and threads in relation to it so im just gonna ask it again,

My R33 has recently started to surge, and want to cut out just as the turbo is spooling up,

and sometimes while i am just driving at the one speed, but is worse while accelerating..but only does it

when the engine is warmed up, never does it when it cold.

the best way to describe it is, it feels like its running outta fuel (yes there is fuel in there!)

could it be the igniter packs?

any help would be much appreciated,

great forum by the way!

cheers, craig

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/
Share on other sites

I have this problem after I fitted a electronic boost controller and turn the gain or boost level up. But when I turn the boost level or gain down the problem always goes away. Sometimes with diffrent fuels the problem would come back so I had to change boost / gain levels depending on the fuel. Fo you have a boost controller fitted?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785564
Share on other sites

if it sounds like its popping its probarly the coils

but if it making all the right sounds but going no where then takes off like a bat outta hell

it will be the normal r33 flat spot

most people change the ecu and have it tuned to fix the problem

but there are other ways around this problem it just depends who you speak to

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785608
Share on other sites

Are you running standard boost? If yes then it's not the boost cut.

My advice:

Do a search on-

O2 Sensor/oxygen sensor. Yours might be dirty/dying

AFM. It might need a clean

Spark plugs. Change them

Coilpacks. Wrap them in tape/silicone

Fuel pump. Maybe yours is on the way out. Change the fuel filter too, it's a good idea anyway.

If the problem remains after all those then get professional help. Or a psychiatrist.

Edited by R338OY
Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785641
Share on other sites

as far as i know, the turbo has been a flowed, but seems to now be running less than the standard 7 psi, i only have a manual boost controller under the bonnet, ill change as much as i can, coils, spark plugs leads etc, if it keeps happening, ill just have to take it to morpowa, or boostin oz to get them to figure it out...thanks guys

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785708
Share on other sites

ok, i took the coil pack cover off, gave it a thrash to make the engine hot, it didnt do it, except for when i first started driving (when it was cold)

i got home , turned the lights off to check for a sparks fromk coils, and there was nothing.

i bought some new ngk laser platinum spark plugs that will be going in tomorrow.

could this problem possibly be my AFM?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3789011
Share on other sites

ah ok.. 2 of my friend's r33 had the same problems too

put it on the dyno and check the fuel pressure, might be your fuel pump

may also be fuel pressure reg too, though not very likely. i'd check fuel pump first

coilpack and afm are other possibilities, but if afm's cleaned like i've mentioned in the other post it should be fine

if afm is playing up or dirty your car wont idle properly in most cases

Edited by chiksluvit
Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3789139
Share on other sites

ok, i spent some time under the bonnet yesterday, changed spark plugs (ngk laser platinum) cleaned afm thoroughly and checked/cleaned igniter packs, also wrapped them in electrical tape just in case,

all seems good, no more surging or choking, but this typical r33 flat spot you all spaeak of is now obviuose, doesnt do it all the time, but every now and then when i boost it hard. for now, it doesnt really bother me, it still eats most ls1's so thats all im worried about at the moment ; )

i also took out the bleeder valve beacause it wasnt always hitting the 11-12 pound it usually does, instead it was only reaching 5-7 pound.

it didnt seem to make much difference without the bleeder valve, but does it matter if i leave it out?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3791059
Share on other sites

taking the bleed vavle out definatly wont hurt anything

the flat spot though i know how to fix it without changing the standard ecu

i have done it to my car and many others and has worked everytime

ok...how?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3791145
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...