Jump to content
SAU Community

Recommended Posts

Hey people.

I'm in a bit of a bind here. I own a 6 speed 2003 V35 Coupe. Problem is I only have 1 ignition key. I took it down to the local Nissan dealer and they didn't know what to do. They happily sold me a new key for $500 then went and told me they couldn't program it. Now I'm up a creek if I ever loose this key, and now I've got a $500 paper wieght. Does anyone know how to get a V35 key replicated?

Link to comment
https://www.sau.com.au/forums/topic/215168-how-do-you-copy-v35-keys/
Share on other sites

I've been checking things out and it looks like a no go so far.

I was talking to some people at East Coast Customs and they said that there is a comp in the car that make random code changes to the chip in the key every time the car is turned on and the key is used. So apparently removing the ECU, the security system and even changing the ignition barrel won't help. They suggested talking to Nissan in Japan. I have some friends over there so I'll get them to ask for me.

I heard that a guy on the Gold Coast might have an idea how to do it, Matt Spry is his name. Works at a place called Perfocmance Injection Tuning Service. I'll give him a call too and see what I can find. Looks like no one really knows how it's done this side of the world. So it looks like I'll just have to find out ;)

What you might have to do is send your key to a Nissan that knows what they're doing... in the states with the G35 spare key (essentially a V35 key with similar transponder) what you do is goto the Infinity dealer and give them your vin number and they'll charge you $90 for the coding.

I'll have a look around on the american forums for you on a local solution. Edit: yep just looked on G35driver site and it appears that it's a dealer only thing.

What you might have to do is send your key to a Nissan that knows what they're doing... in the states with the G35 spare key (essentially a V35 key with similar transponder) what you do is goto the Infinity dealer and give them your vin number and they'll charge you $90 for the coding.

I'll have a look around on the american forums for you on a local solution. Edit: yep just looked on G35driver site and it appears that it's a dealer only thing.

Yea I checked with the local Nissan Dealers, they said they could do it. But when I went out back to get something out of the car they were all standing around scratching their heads. That was the Nissan Dealer at Kippa Ring if that helps, they had all of the equipment to do it. but they told me they didn't know any of the codes or something. When I asked Nissan Australia they simply said it couldn't be done and that there was no way they could help me because the car was an import.

I'll post a pic of the key later buts it looks like a generic Nissan Key to me. I'll have to do that when I get home.

Thanks for trying to help out guys, I'll post more information as I get it.

  • 4 weeks later...

Just a quick update people.

I had some friends check out Nissan Australia again. Oddly enough they were told that it was possible.

Apparently, two Nissan dealers in Brisbane could do it by liasing with Nissan Japan.

But when my friends called them up they said it couldn't be done. That was with Nissan Windsor as I recall.

No matter, I have someone over in Japan checking things out for me now. So I'm waiting on that.

If or when I find out more, I'll let you all know.

have you tried a locksmith??

A larger company would be better. And talk to someone that does the automotive key cutting and programming there. You may in fact be able to get it much cheaper than what nissan would rape you for.

I sure have, they all go umm hmm uh no.

Oh well. I tried a few security specialists and electronics specialists too.

No luck.

  • 1 month later...

I got a friend in Japan to take my details to a mechanic over there and they said they don't know the engine code type. Looks like Nissan only. If nissan japan has fixed the website, I'll try and give them a call.

My email to Nissan Japan came back today. Unfortunately I have just been informed that the key can only be programmed by a Nissan dealer. Problem is I already went to them and they couldn't do it. I will email Nissan Japan back and inform them of this. But it looks like breaking the code may be the only way. I have heard rumours of people who can do this. Can anyone confirm?

  • 2 weeks later...

Good news! I emailed Nissan Japan back and they said if I could get the BCM number from in the car next to the accelorator pedal they could get me the code! It's under the plastic covers on the back of what looks like a comp for those who need it. I sent them the number and they got me the code! I took the code to a local Nissan dealer and they copied a key for me. Thanks Nissan Japan! Too bad Nissan Australia doesn't help us with stuff like that :P

  • 2 years later...

I got a replacement key coded for my 2005 V35 at Amalgamated Locksmiths at Newstead in Brisbane for $150. They advertise transponder keys on ebay. They needed my car and a working Key.... My Advice is to get a replacement transponder key first and then worry about getting one with all the buttons....Dont wait to lose your only key like i nearly did...

Guy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...