Jump to content
SAU Community

Recommended Posts

Guest Robo's

Ive got a Apex pod filter, and agree im defeating the purpose of having hot air go into the turbo and then get pushed out at a much hotter temperature, then letting the stock cooler trying to cool it, before going into the plenum.

So why not trying to reduce the air coming into the turbo through a cold air system. I dont want to cut any holes, so i thought get a stock box with the over the radiator duct and try and hack the box to make the pod fit. Then try and have another cold air duct enter the box from underneath or something, probably only room for a small tube.

Anyone done something like this?

Link to comment
https://www.sau.com.au/forums/topic/21548-pod-in-stock-airbox/
Share on other sites

Originally posted by Champinco

i have a qn..im new to this whole POD thing. all i know is that i have an HKS POD with a HKS big intercooler. would i or do i have to partition off the POD???  (put a box surounding around it?)

Cheers

Yes. Otherwise you should go back to the stock airbox.

A pod filter with no partition will cost you performance every time.

See this thread: http://www.skylinesaustralia.com/forums/sh...&threadid=13003

Originally posted by Robo's

Anyone done something like this?

Thought about it but have you actually ever pulled the airbox out? It is far too small to fit a pod filter inside and if you could find a pod filter that small it would actually reduce performance due to friction, and generally a lower filter surface area than the stock panel.

I then thought of building a fiberglass box that would take the stock airbox lid and fit a pod filter inside.

That seems to be a better idea maybe.

Guest Robo's
Originally posted by sewid

Thought about it but have you actually ever pulled the airbox out? It is far too small to fit a pod filter inside and if you could find a pod filter that small it would actually reduce performance due to friction, and generally a lower filter surface area than the stock panel.

I then thought of building a fiberglass box that would take the stock airbox lid and fit a pod filter inside.

That seems to be a better idea maybe.

I had a feeling it would be too small, (i havent seen one) hence why building a small box, so if a pod is illegal, then a partition is illegal too, so we have to put a lid on it?

Originally posted by Robo's

I had a feeling it would be too small, (i havent seen one)  hence why building a small box, so if a pod is illegal, then a partition is illegal too, so we have to put a lid on it?

It's not illegal because it lacks a lid, it's illegal due to the EPA restrictions. That is it's too noisy (induction noise and the like) and the changes in emissions which may occur due to the changed intake.

Putting a lid on it is a way to lower the probability the cops are gonna defect you for it during an under bonnet inspection, but if they heard a blow off valve type noise from your car they probably wont know/care where it came from.

Cops seem to think that "blow off valves" are illegal tools of the devil. I would like to know if many of them actually know theyre just another part of a standard proper turbo car setup.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...