Jump to content
SAU Community

Recommended Posts

What turbos are you 350+HP guys running (rb25)

i dont want to use HKS since its SOOOOO expensive.

so im open to other turbos, any ideas?

i have all supporting mods now, and just need turbo, then i can do ECU retune.

i need powaaaaaaaa

I blew my rb25 turbo, and i have a rb20 turbo on it now as a spare, and its killllling me

Link to comment
https://www.sau.com.au/forums/topic/215747-turbo-help/
Share on other sites

bush bearing (360-degree not 270) high flow Rb 25 turbo, with oil and water cooling

steel wheels

front / rear housings bored to the max

under a grand new and fitted :D

Where from? PM me.

:)

Link to comment
https://www.sau.com.au/forums/topic/215747-turbo-help/#findComment-3811107
Share on other sites

lol, cant help with what I have (Slide Performance hiflow) as they arnt made anymore

arnt there turbo places in Japan that do highflows?

there are at least 2 well known turbo shops in each Aussie state that can do either journal or bb high flows...... but you wont find anything close to the cost of the $790 one I have :D

I would have thought you could pick up a 5000km old hks 2535 for a grand in japan. yahoo auctions and all that

Link to comment
https://www.sau.com.au/forums/topic/215747-turbo-help/#findComment-3811115
Share on other sites

lol, cant help with what I have (Slide Performance hiflow) as they arnt made anymore

arnt there turbo places in Japan that do highflows?

there are at least 2 well known turbo shops in each Aussie state that can do either journal or bb high flows...... but you wont find anything close to the cost of the $790 one I have :blink:

Then gimme yours! :)

Link to comment
https://www.sau.com.au/forums/topic/215747-turbo-help/#findComment-3811281
Share on other sites

lol, cant help with what I have (Slide Performance hiflow) as they arnt made anymore

arnt there turbo places in Japan that do highflows?

there are at least 2 well known turbo shops in each Aussie state that can do either journal or bb high flows...... but you wont find anything close to the cost of the $790 one I have :blink:

I would have thought you could pick up a 5000km old hks 2535 for a grand in japan. yahoo auctions and all that

i can

but not a 400HP turbo

i can pick up the 2535/2540 for around 5 or 600 (i have one) but that wont get me up and over 350 supposedly

im looking for bigger numbers

Link to comment
https://www.sau.com.au/forums/topic/215747-turbo-help/#findComment-3811362
Share on other sites

how much are they charging for HKS GT-RS kits there? it should be reasonable money.

nengun should be able to get it to you for around AUD$2k (bolt in kit). alternatively what about a GT3071 (60mm turbine, 56 trim comp) should be 450hp turbo but some fiddling around with dumps, spacers (maybe) and braided lines. it depends on availability in japan. failing that atpturbo.com seem to be reasonable for prices and delivery.

plus if you can pick up a HKS cast manifold on the cheap as they have a divider you could even buy the split turbine housing to go with it which should spool up even quicker. lots of options out there.

how much is too much to spend?

quick edit: greenline have the GT-RS for 222,500 yen.

Edited by wolverine
Link to comment
https://www.sau.com.au/forums/topic/215747-turbo-help/#findComment-3812279
Share on other sites

which is way to much

im looking under 1500 for turbo only

G`day Grant,HIFLOW`S $1750 & that cheap i have been quoted more one place wanted $2000,so look`s like you might be looking around of one your end haven`t seen many in aussie for sale.i have a HIFLOW which is buggered had quote to fix $1200.hope you find somethink.cheer`s chuckie.
Link to comment
https://www.sau.com.au/forums/topic/215747-turbo-help/#findComment-3812358
Share on other sites

I got an awesome deal from slide.

seven hundry + two buggered turbos (1x 32, 1x33) got me a 33 highflowed in return

with injectors (got 550's sitting here) and ecu remap (one day this year) Id expect 220awkw without leaning on it too hard.......

Link to comment
https://www.sau.com.au/forums/topic/215747-turbo-help/#findComment-3812396
Share on other sites

I have a brand new Garrett 3076R for sale. It cost me $2100 AUD

You can have it for $1500AUD + shipping to JP (probs $100)

Details/photos -> http://www.nissansilvia.com/forums/index.p...howtopic=277649

Will suit your drifting application perfectly seeing it was designed for a 2L and is rated to 525hp....In fact my friend has the same turbo on his R33 GTSt and makes 290rwkw.

T3 flange and externally gated (the only proper way to be gated)

Edited by AlexCim
Link to comment
https://www.sau.com.au/forums/topic/215747-turbo-help/#findComment-3814914
Share on other sites

I have a brand new Garrett 3076R for sale. It cost me $2100 AUD

You can have it for $1500AUD + shipping to JP (probs $100)

Details/photos -> http://www.nissansilvia.com/forums/index.p...howtopic=277649

Will suit your drifting application perfectly seeing it was designed for a 2L and is rated to 525hp....In fact my friend has the same turbo on his R33 GTSt and makes 290rwkw.

T3 flange and externally gated (the only proper way to be gated)

BUY IT

2530 should do 220rwkw?

Link to comment
https://www.sau.com.au/forums/topic/215747-turbo-help/#findComment-3815169
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...