Jump to content
SAU Community

Recommended Posts

post-44881-1208438766_thumb.jpgpost-44881-1208438731_thumb.jpg

hi guys,

this is my 1996 series 2 Skyline N/A auto.

Tell me what you think.

With a limited budget set in mind i wanted to keep it subtle and clean and not go overboard and cause the attention dat skylines create as we all know.

So far it has: Cusco Coilovers fully adjustable, riding on 17"x7" front and 17x8" super advan rims. All stereo components decked out in jaycar kevlar series, Custom parcel shelf, pioneer head unit, 300rms 12" carbon fibre Jaycar sub in a custom box. Painted GT badges black and sprayed red calipers and silver hubs, smoked indicators, Drift pod filter in an enclosed box, 3A racing cannon muffler and 4000k white bulbs.

WANTED:

Nismo front lip for series 2 (refer to the pic below, please pm me if you have it, will pay cash and pickup in Melbourne area.

post-44881-1208572948_thumb.jpg

2 very sexy cars

love the calipers man

GTR seats

sdlkjhsadlhgdas;ghsdg

you lucky bastard :3some:

i don't do things by halves :)

how much you pick those up for?

see below

I've seen those 34GTR seats for sale from one of the vendor for $1900/pair

I wish I've got that much of $$ to buy those seats! one of the best! seats u can find/fit into ur line

cheers

exactly... and as far as i'm aware they do not need to be engineered (can someone shed some light on this? QLD)

bolt straight in, reclinable and no dramas.

trust me money is tight. after the LMGT4s and these seats there won't be anymore spending for a while. that said the money put together for the two items are enough for a turbo conversion or more power. however until i can make full use of the power i have now there really isn't much need. semi slicks are next on the cards

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...