Jump to content
SAU Community

Recommended Posts

Not a mod.

Hit and run.

There are several four letter words Id like to type. But I dont want to risk banning.

Im devistatd to say the least. Its taken me several hours to build up the courage to see the full extent in day light.

Only about a month after spending $500 odd on GTR bonnet, latch and grille. And only one week after I got on top of my general maintanence (ABS unit, grease bushes, brake pads, brake fluid, oil temp gauge, oil change, oil filter, petrol fuel lines changed etc.)

Damage done:

Bent GTR Bonnet + deep scratching (perhaps may be bent back)

Bent and chipped paint Guard (perhaps can be bent back)

Shattered GTR Grille

2 x Headlights

2 x Blinkers

GTST Front bar

GTST Reo bar

Bent GTR bonnet latch

I fear that the radiator support my be damged too.

I dont think Im going to se get the insurance company involved. Its a $2500 excess. Money that I can take to spend myself on rebuilding. Im trying to put a positive spin on it by buying a Finnal Konnexion front bar, GTR N1 head lights, GTR blinkers and GTR front quarter pannels. Straighten GTR Bonnet, Carbon fibre GTR grill. But its an eye wateringly large amount of money I shouldnt have to spend cos some f*$king toss bag on red P's decided to come in too quick into a round about, and understeer/lock up and plow into me!

dsc00410mr8.th.jpgthpix.gif

If you guys see anyone selling GTR or GTST boby parts in Syd please PM me!

Edited by GTS4WD

Fark

Sorry to hear about that mate

I was pissed off enough on Wednesday when someone hit my car and left without leaving a note.

I would hate to think how I would be if that happened to me

Gets worse.

F*ckin rails are bent!

Any one know what that means?

5K+ at least to fix. Or. ay the excess, get the money and some man in a suite takes my lovely awy from me.. ;)

I want to meet the man that ran into me..

f_noplatem_264195a.jpg

f_noplate2m_2c07e59.jpg

f_noplate5m_e3b85cf.jpg

f_noplate3m_f29bf02.jpg

sorry about the blue stuff on the number plates....its just i have these posted up on more public places and i just use them whenver i post pics up of my car :P

also: i feellll sooooo sorry for the guy who got hit and runned......thats gay man...usually i think im in controll of things like that..like i dont park anywhere unless i know the area (schoool) or the ppl (friends house) or i just dont park ther for long at all (in and out of coles etc)......and im carefull when i drive because of insurance ($3000 ex)....but a hit and run....fark man didnt think about that ay...cant do much if ur car comes out second best.....

also i just recently took the fog lights out(came with car from jap).....looks mean...post pics when i get some :D

you know that's the weird thing Cris. these rims make the car seem a lot higher than what it actually is.

there was about 120mm clearance with my sparco rims, the nismo's have the same rolling diameter so really the height shouldn't have changed.

see how the skirts go, if not i can always drop down 1 or 2 circlips on the bilsteins.

you know that's the weird thing Cris. these rims make the car seem a lot higher than what it actually is.

there was about 120mm clearance with my sparco rims, the nismo's have the same rolling diameter so really the height shouldn't have changed.

see how the skirts go, if not i can always drop down 1 or 2 circlips on the bilsteins.

what diameter are the wheels? they look tuff tho.. and what skirts did you buy? theyl make the car look lower no doubt..photos dont do mine justice either, looks alot lower in real life

what diameter are the wheels? they look tuff tho.. and what skirts did you buy? theyl make the car look lower no doubt..photos dont do mine justice either, looks alot lower in real life

thanks - i'll try to get some high res pics later today.

the rims are 17 x 8.5, running 235s 595SS on them now. hopefully will have some 595RS semis to put on them at the end of the year. they are so amazingly light, makes me nervous driving them around.

p.s. - love the silhouette with those LMGT2 rims!!! hot!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...