Jump to content
SAU Community

Recommended Posts

Hey guys,

Wanting to put the car on stands, i've jacked up a few r33's under the front suspension setup to place the stands on either side but i've never done it on the R34. Just wondering where the point is so i can get it up in the air. Don't want to break anything and although it may sound stupid id like to check! Thanks!

Edit - Meant to put this in maintenance section, my mistake sorry mods!

Edited by Got Boost?

the underside of the r34 is basically the same as the 33 so if you can get to the point you used to use go there again.

a really easy place to jack from is the tow loop/hook at the end of the chasis rail next to the radiator support. even on a low gtr most jacks can get to that

the underside of the r34 is basically the same as the 33 so if you can get to the point you used to use go there again.

a really easy place to jack from is the tow loop/hook at the end of the chasis rail next to the radiator support. even on a low gtr most jacks can get to that

I know exactly where your talking about! Ill try the tow hook, thanks a lot mate!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
×
×
  • Create New...