Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

got defected this weekend aswell. pod, bov, two low, he didnt have a db meter so he said i will be receiving a letter in next few days stating which authorised inspection station i can take car to because two many people are doing dogys. does that sound right?

Do you only get defected for aftermarket kits?

What about gtrs and evos and stis..

They have pretty big fmic already.

they are standard fitment from factory, therefore meeting emission's level's as per manufacture... short answear is its A ok!

I got pulled up on monday.

HWP said I will be getting a letter for exhuast and pod.

Need to go to a dedicated inspection station for them to take photos, send them to the EPA and compare to pictures they have of standard car.

I also have fmic and the dude at the inspection station said I need everything returned to stock or proof it complies with ADR's.

Without getting a emission test, is there anything on the net/or here that states that front mounts are adr compliant. I dont have factory smic, and its a last resort to scrabble around getting all the items.

I got pulled up on monday.

HWP said I will be getting a letter for exhuast and pod.

Need to go to a dedicated inspection station for them to take photos, send them to the EPA and compare to pictures they have of standard car.

I also have fmic and the dude at the inspection station said I need everything returned to stock or proof it complies with ADR's.

Without getting a emission test, is there anything on the net/or here that states that front mounts are adr compliant. I dont have factory smic, and its a last resort to scrabble around getting all the items.

I knew you would get done after i first seen your car on the other forum and you living in campbelltown. And i bet you got done there too, right? HWP are the worst there. I hate going to my mates house at st andrews just wondering if ill get home without being defected. My mate lives around the corner from the cop shop and is on first name basis with one of the cops there now. Hes been done numerous times.

IM240 will test 4 things(correct me if i'm wrong)

THC- total hydrocarbons

CO- Carbon Monoxides

CO2 - Carbon Dioxides

NOx - Oxides of Nitrogen

Some of you other guys may be able to recall the levels that these should be at to pass.

The hydrocarbons is done by taking a reading inside a sealed room to see if you car is leaking fuel vapour, so make sure your carbon canistor is connected correctly, the other three are exhaust readings.

Cheers guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...