Jump to content
SAU Community

Recommended Posts

Due to my white r33 gts4 being written off, the complete car is up for wrecking, all parts from the engine back are available.

The car has had a rb25det conversion out of a stagea and a 5 stud hub conversion using r33 gtr hubs. diff and diff gears. Also the brakes have been upgraded to r32 gtr brake.

Engine, gearbox, diffs, brakes, suspension will be available soon

Below is a list of items for sale; (probably missed a few items)

EXTERIOR

Shell - offers? The front left suspension strut has shifted towards the firewall (5mm), also there is a bend in the pillar above the passangers door, Front the engine forward has been destroyed and where the gearbox boot is mounted has bent. See photos.

Veilside side skirts (white) - $100 for both Slight damage but easily repairable. See photos

Veilside rear bar (white) - $100 Slight damage from being winched onto the tow truck See photo

Taillights (white) - $100 for both Slight paint damage, includes working globes See photo

White skyline bit - $50

GT badges - $10

White skyline boot lock - $50

Doors complete – $200 each

Boot with drift wing (maroon) - $300

Fuel flap lid -$10

Electric mirrors - $50 each

Wipers - $100 for all 3 finished in carbon fibre paint

INTERIOR

Instrument cluster - $100

Climate control unit - $60

Gear box surround with white gear boot finished, in high gloss black, includes cig lighter and ash tray - $50 Also have drivers and passengers side door plastic bits in high gloss black $100 for the lot

Dash surround with clock etc - $80 Have started to peel back the rubber coating ready to be painted

Centre console - $50 includes handbrake boot.

Door trims $50 each excellent condition

Floor carpet - $100 excellent condition

Seatbelts, buckles full set - $100

Headlight stalk - $20

Steering wheel surround plastic - $30

Ignition surround plastic bit - $20

Glovebox - $30

Rear parcel shelf - $50 includes speaker covers

Complete boot interior - $80 The bit that covers between the headlights is damaged, the rest is fine.

Electric aerial - $50

Rear wiper motor - $30

Space saver 4 stud - $50

Jack and wheel changing gear - $30

Front seats $150 each or $200 both Perfect condition

Rear seat - $100 perfect condition

Factory skyline car mats - $150

AFTERMARKET

C’s short shifter - $150

Bosch 044 fuel pump - $150

Nismo 320 dash - $600 has never been used only taken out of the box once to check connections

Clear front bar indicators - $50 never been used

White nismo duracon gear knob - $50

5 month old Work emotion xt7’s in grey 18”x8.5 +32 with bridgestone Potenza re01 235 all round, includes light weight wheel nuts - $2000 Front left tyre has minor damage.

Pioneer Car audio system, includes 4 speakers, dual din headunit (cd, mini disc), car computer, cd stacker, mini disc stacker, tv - $400

Sard turbo timer - $50

Speco boost guage - $50

Autometer boost, afm guage and pod - $120

leather momo steering wheel with boss kit - $150

Sealed lead acid battery - $100

unknown strut brace - $50

afm sensor - $20

Items available from Kellyville, Sydney

Michael 0402168896

post-11558-1209283581_thumb.jpg

post-11558-1209283604_thumb.jpg

post-11558-1209283632_thumb.jpg

post-11558-1209283656_thumb.jpg

post-11558-1209283739_thumb.jpg

post-11558-1209283768_thumb.jpg

post-11558-1209283788_thumb.jpg

post-11558-1209283814_thumb.jpg

post-11558-1209283836_thumb.jpg

post-11558-1209283860_thumb.jpg

post-11558-1209283885_thumb.jpg

post-11558-1209283911_thumb.jpg

post-11558-1209284252_thumb.jpg

post-11558-1209284275_thumb.jpg

post-11558-1209284309_thumb.jpg

post-11558-1209284334_thumb.jpg

post-11558-1209284361_thumb.jpg

post-11558-1209284394_thumb.jpg

post-11558-1209284427_thumb.jpg

post-11558-1209284459_thumb.jpg

post-11558-1209284486_thumb.jpg

post-11558-1209284508_thumb.jpg

post-11558-1209284532_thumb.jpg

post-11558-1209284552_thumb.jpg

post-11558-1209284572_thumb.jpg

post-11558-1209284596_thumb.jpg

post-11558-1209284619_thumb.jpg

post-11558-1209284646_thumb.jpg

post-11558-1209284696_thumb.jpg

post-11558-1209284715_thumb.jpg

post-11558-1209284737_thumb.jpg

post-11558-1209284756_thumb.jpg

post-11558-1209284779_thumb.jpg

post-11558-1209284806_thumb.jpg

post-11558-1209284827_thumb.jpg

post-11558-1209284846_thumb.jpg

post-11558-1209284871_thumb.jpg

post-11558-1209284906_thumb.jpg

post-11558-1209284930_thumb.jpg

post-11558-1209284956_thumb.jpg

post-11558-1209285023_thumb.jpg

post-11558-1209285052_thumb.jpg

post-11558-1209285073_thumb.jpg

post-11558-1209285097_thumb.jpg

post-11558-1209285121_thumb.jpg

post-11558-1209285146_thumb.jpg

post-11558-1209285175_thumb.jpg

post-11558-1209285195_thumb.jpg

post-11558-1209285217_thumb.jpg

post-11558-1209285240_thumb.jpg

post-11558-1209285650_thumb.jpg

post-11558-1209285691_thumb.jpg

post-11558-1209285750_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/216632-wrecking-white-r33-gts4-sydney/
Share on other sites

  • Replies 192
  • Created
  • Last Reply

Top Posters In This Topic

Update on parts:

gt badges - sold

boot interior - sold

steering wheel plastic surround - sold

plastic between steering wheel and pedals - sold

high gloss plastic bits, centre plastic bit with clock, gearbox surround - sold

cheers,

Michael

Edited by specialk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...