Jump to content
SAU Community

Recommended Posts

So I figured I'd make some sort of photo diary of the work being done to my car at Driftline down in Campbellfield, VIC.

Having hit a runaway gate at DECA (thanks for securing the gate with a watering hose... real intelligent) a year n a bit ago, the car's been looking a little sorry and often referred to as the ghetto R32. but no more... with a fresh lick of satin black, full kit, flared fenders and some other bits, it should come out looking mint.

So first the raw materials:

Take 1 beaten up R32

Add:

1 bonnet

post-256-1212566065.jpg

2 pumped D-Max front fenders from Empire Aero

194x214-ws000081.jpg

239x197-ws000082.jpg

2 pumped rear fender flares from Viva Garage

R32%202%20RF.JPG

1 Type J Front Bumper from Viva Garage

R32%20JR%20FB.jpg

2 vertex sideskirts and rear bumper from Viva Garage

R32%20VT%20SS%20RB.jpg

1 open grille, 2 GTR grill clips, and 1 V-Spec bonnet lip from Laurence (gojira/dr1ft.jp)

msg-662-1209048273.jpg

zest_ky-img542x306-1189258102r32ftopm.jpg

a set of Work VS-XX in 17" by custom offsets to fill out the fenders for flush fitment

0.92296200%201180172989_63.jpg

Wheels have been taken apart atm to have custom outer bands machined and have the centres powdercoated black to match the car.

Update (from a while back):

post-256-1211793854.jpg

post-256-1211793869.jpg

post-256-1211793878.jpg

post-256-1211793889.jpg

Link to comment
https://www.sau.com.au/forums/topic/216749-my-epic-r32-rebuild/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

funky... nice work on airbrushing yourself onto your bonnet! looks like a reflection!

well picked sir... but a flaw in your theory... i'm not a japanese bloke missing my torso.

the guys at the workshop decided to fit up the Viva Garage supplied rear quarters today.

I got an abusive phone call from Roshan, for supplying shit quality quarters that didn't line up with the door line or boot line. His options were "throw them away... or cut them up and make them fit"... the latter will cost a lot more time, which we don't have, so the hunt is on for better quality flared rear quarter fenders.

He said he took some pics of it on the car to show how horribly out they were. Should be interesting.

for sure, should've gotten the rears from Empire Aero as well along with the fronts... but we had already ordered the rears from Viva, so that's why we're in this predicament. Contacted Empire about getting rears as well... lets see how we go.

well just to update, today we decided to chop the Viva gaurds (remove the lips that are supposed to go under the boot and door etc) and redo the glass.

Haven't decided on how to blend it... a full blend will require the windows out etc... which is a long and complex process. probably won't go with the option... this means we'll have to go with a more ghetto look for the rears, with the panel edges visible ;)

well just to update, today we decided to chop the Viva gaurds (remove the lips that are supposed to go under the boot and door etc) and redo the glass.

Haven't decided on how to blend it... a full blend will require the windows out etc... which is a long and complex process. probably won't go with the option... this means we'll have to go with a more ghetto look for the rears, with the panel edges visible ;)

thats not very Epic Shan..

go the whole hog .. no point spending the cash for a ful spray and leave that little bit bugging you forever.

if we were to take the glass out etc it'd extend the timeframe by two weeks... its the main deciding factor...

we're gonna try and do some tricky stuff to blend it in... without blending it in. it'll either turn out shit... or epic ;)

the respray is only the outer panels and edges n door jams etc... engine bay's already black as is the inside of the boot etc...

the other alternative is to flare the metal out... but cos of the track damage on the driver side it's pretty hard... easier to just cover the battle scars with fibreglass.

  • 4 weeks later...

lol the P plates was a shock to me too... then I realised I had to get my cuz to drive my car to the shop cos I was in brissy, so he had to put em up. hope he didn't munt the clutch like last time by riding it.

the guys at the workshop decided to fit up the Viva Garage supplied rear quarters today.

I got an abusive phone call from Roshan, for supplying shit quality quarters that didn't line up with the door line or boot line. His options were "throw them away... or cut them up and make them fit"... the latter will cost a lot more time, which we don't have, so the hunt is on for better quality flared rear quarter fenders.

He said he took some pics of it on the car to show how horribly out they were. Should be interesting.

i recently brought a full r32 viva garage kit from a friend for $200. i will be throwing the sideskirts away as they are so bull shit its not funny. rear bar was the best fitting after i cut and shut it heaps and the front bar needed a fir bit of time aswell. well the front bar was almost straight. had to fold the sides in heaps. pretty crap realy. worse for the bloke i brought it off as it cost him $1200 and sat in his shed for 12 months.

sorry to hijack just thought i would emphasise that fact

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...