Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Exedy 5 puk clutch - used for about 3000 kms... hardly worn, couldn't hold the 300rwkw... was fine at 270rwkw though!

$300 ono

still got it??

will pay now!

NPC rebuilt OS Giken TS2 twin plate clutch - Basically brand new except the splines are damaged on the friciton plate (riveted hub needs replacing on one of the plates) - push type $500 firm

where is npc at?

how many kays since rebuilt??

cheers

NPC rebuilt OS Giken TS2 twin plate clutch - Basically brand new except the splines are damaged on the friciton plate (riveted hub needs replacing on one of the plates) - push type $500 firm

where is npc at?

how many kays since rebuilt??

cheers

NPC are in QLD.... although you don't need to get it repaired there. Although would be the cheapest option.

http://www.npcperformance.com.au/

1500km at most.... splines were damaged due to faulty input shaft... uploading some photos now..

npc rebuilt (jacobson spec plates)

os giken ts2bd. (not damperd anymore)

post-19586-1211797006_thumb.jpgpost-19586-1211796902_thumb.jpgpost-19586-1211796749_thumb.jpgpost-19586-1211796510_thumb.jpg

the "g box" one has the dammaged spline. pulled out due to motor rebuild. drove fine but upgrded to a r3c.

advan 048 semi slick race tyres.

20% worn. $385 a set. ($450 each new lol)

235-45-r17. medium/hard compound.

post-19586-1211797499_thumb.jpg

post-19586-1211798484_thumb.jpg

these have been used for 1 practice session at barbagallo.

porsche cup car slicks.

24-64-18.

aka 240-40-18.

these are almost completly new. again used for only one practice session. new tread depth is 3.1mm the LOWEST on these is 2.4mm.

so around 15% worn on average.

$600 a set.(4) ($550 each new)

post-19586-1211799376_thumb.jpg post-19586-1211799560_thumb.jpg

6 available total. (2 on hold.)

also available is the rear. big ass gibson gtr size. (if you can fit 275's under the rear of you car these will fit.)

27-68-18.

aka 270-45-18.

also only about 15% worn.

350 a pair.

post-19586-1211800073_thumb.jpg post-19586-1211800894_thumb.jpg post-19586-1211801011_thumb.jpg

r32 gtr gearbox partly dissasembled.

smashed input shaft. suit rebuild or gearset upgrade.

$250 post-19586-1211859433_thumb.jpg post-19586-1211859312_thumb.jpg

r32gtr gearbox smashed 3rd. complete un-opened.. suit gearst upgrade or rebuild. still drives fine with no noises except no 3rd lol.

$350 post-19586-1211859605_thumb.jpg

in the first post theres the 32GTR box and the 33GTS-4. but you've listed 2x 32GTR boxes?

is there a typo?

interested in the 33 box but not the price.

advan 048 semi slick race tyres.

20% worn. $385 a set. ($450 each new lol)

235-45-r17. medium/hard compound.

post-19586-1211797499_thumb.jpg

post-19586-1211798484_thumb.jpg

these have been used for 1 practice session at barbagallo.

hey there

20% worn meaning theres 80% left still??

thanks

in the first post theres the 32GTR box and the 33GTS-4. but you've listed 2x 32GTR boxes?

is there a typo?

interested in the 33 box but not the price.

They are one of each, but are the same thing. Only difference is the 33 bell housing is more strengthened than a 32 one. Both are push type, both suit a 32 GTR...

Pm offer, these boxes are Daves not mine so it isn't my call :down:

hey there

20% worn meaning theres 80% left still??

thanks

Yes, there is still 80% left :down:

ok, first post updated as of 6.6.08....

All irrelevant posts of mine have been deleted to clean the thread (ie sold items)

Cheers

Anna

If they are not picked up i will take them, need to be sent to Vic though

Hey Roy,

no dramas, il let you know if they don't get collected :)

Can work out freight etc then

mind shooting me a pm of the Rb26 please ? :( thanks! :D

no dramas, Il get Dave to send you one today. :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
×
×
  • Create New...