Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Exedy 5 puk clutch - used for about 3000 kms... hardly worn, couldn't hold the 300rwkw... was fine at 270rwkw though!

$300 ono

still got it??

will pay now!

NPC rebuilt OS Giken TS2 twin plate clutch - Basically brand new except the splines are damaged on the friciton plate (riveted hub needs replacing on one of the plates) - push type $500 firm

where is npc at?

how many kays since rebuilt??

cheers

NPC rebuilt OS Giken TS2 twin plate clutch - Basically brand new except the splines are damaged on the friciton plate (riveted hub needs replacing on one of the plates) - push type $500 firm

where is npc at?

how many kays since rebuilt??

cheers

NPC are in QLD.... although you don't need to get it repaired there. Although would be the cheapest option.

http://www.npcperformance.com.au/

1500km at most.... splines were damaged due to faulty input shaft... uploading some photos now..

npc rebuilt (jacobson spec plates)

os giken ts2bd. (not damperd anymore)

post-19586-1211797006_thumb.jpgpost-19586-1211796902_thumb.jpgpost-19586-1211796749_thumb.jpgpost-19586-1211796510_thumb.jpg

the "g box" one has the dammaged spline. pulled out due to motor rebuild. drove fine but upgrded to a r3c.

advan 048 semi slick race tyres.

20% worn. $385 a set. ($450 each new lol)

235-45-r17. medium/hard compound.

post-19586-1211797499_thumb.jpg

post-19586-1211798484_thumb.jpg

these have been used for 1 practice session at barbagallo.

porsche cup car slicks.

24-64-18.

aka 240-40-18.

these are almost completly new. again used for only one practice session. new tread depth is 3.1mm the LOWEST on these is 2.4mm.

so around 15% worn on average.

$600 a set.(4) ($550 each new)

post-19586-1211799376_thumb.jpg post-19586-1211799560_thumb.jpg

6 available total. (2 on hold.)

also available is the rear. big ass gibson gtr size. (if you can fit 275's under the rear of you car these will fit.)

27-68-18.

aka 270-45-18.

also only about 15% worn.

350 a pair.

post-19586-1211800073_thumb.jpg post-19586-1211800894_thumb.jpg post-19586-1211801011_thumb.jpg

r32 gtr gearbox partly dissasembled.

smashed input shaft. suit rebuild or gearset upgrade.

$250 post-19586-1211859433_thumb.jpg post-19586-1211859312_thumb.jpg

r32gtr gearbox smashed 3rd. complete un-opened.. suit gearst upgrade or rebuild. still drives fine with no noises except no 3rd lol.

$350 post-19586-1211859605_thumb.jpg

in the first post theres the 32GTR box and the 33GTS-4. but you've listed 2x 32GTR boxes?

is there a typo?

interested in the 33 box but not the price.

advan 048 semi slick race tyres.

20% worn. $385 a set. ($450 each new lol)

235-45-r17. medium/hard compound.

post-19586-1211797499_thumb.jpg

post-19586-1211798484_thumb.jpg

these have been used for 1 practice session at barbagallo.

hey there

20% worn meaning theres 80% left still??

thanks

in the first post theres the 32GTR box and the 33GTS-4. but you've listed 2x 32GTR boxes?

is there a typo?

interested in the 33 box but not the price.

They are one of each, but are the same thing. Only difference is the 33 bell housing is more strengthened than a 32 one. Both are push type, both suit a 32 GTR...

Pm offer, these boxes are Daves not mine so it isn't my call :down:

hey there

20% worn meaning theres 80% left still??

thanks

Yes, there is still 80% left :down:

ok, first post updated as of 6.6.08....

All irrelevant posts of mine have been deleted to clean the thread (ie sold items)

Cheers

Anna

If they are not picked up i will take them, need to be sent to Vic though

Hey Roy,

no dramas, il let you know if they don't get collected :)

Can work out freight etc then

mind shooting me a pm of the Rb26 please ? :( thanks! :D

no dramas, Il get Dave to send you one today. :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...