Jump to content
SAU Community

Recommended Posts

hey im new to this site and have a few qeustions how much power does a r33 95 gtst put out from factory and how much boost can i run with a standard cooler and remaped ecu it also has 3.5 inch exhaust pod so whats an estimate of power.also will a vl turbo intercooler and piping fit on the 33 if not is there much modding to get it to fit cuz i have a spare 1 lying around

this is a v35 forum, you can move your post to turbo forum...

but for the record std is 184kw or about 150kw-ish at rear wheels.

std cooler probably wont get you past 9psi even with exhaust. get a fmic and you can boost it up to 12psi with std turbo - no idea about vl cooler

this is a v35 forum, you can move your post to turbo forum...

but for the record std is 184kw or about 150kw-ish at rear wheels.

std cooler probably wont get you past 9psi even with exhaust. get a fmic and you can boost it up to 12psi with std turbo - no idea about vl cooler

how do i moove it can a mod do it for me soz for posting in the wrong section im new i am having trouble finding things on this site ie what is the name for the skyline section i was trying to do a search about fitting a cooler to my 33 n couldnt find sh1t n i know theres prob 50 different threads about it somewere!!!!!!!!!!!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...