Jump to content
SAU Community

Recommended Posts

well

sounds stupid i know, BUT its true (in my case)

Normally i average 200-250Km a tank

well, after i put this new to4e turbo on....i got 280KM to a half of a tank...

ao thats over 500KM to a tank if i calculate it correctly

ill do a test since i have to fill it up anwyays and i will have a week before i get a tune.

more on that later

yeah, im curious to see gas mileage between rough tune and after Rom tune with more fuel delivery parts installed.

im hoping 450+ KM a tank...if i can get 300 id be happy

this 250km a tank is killing me

its huge

i had to grind part of the compressor housing to fit it on the stock manifold (stainless had a huge ass crack so i threw it away)

its a t04E size compressor

50 trim

i get 10psi at 4k rpm

im imagining 1 bar at 4300-4500rpm

when i get home i will throw up a picture of it next to a stock turbo for comparrison

well sounds stupid i know, BUT its true (in my case)

Normally i average 200-250Km a tank

well, after i put this new to4e turbo on....i got 280KM to a half of a tank...

ao thats over 500KM to a tank if i calculate it correctly

ill do a test since i have to fill it up anwyays and i will have a week before i get a tune.

more on that later

What did you do, run it on 2 cylinders only? :)

Whats that knocking noise I hear? :(

lol

nah

AFs are in the low 13s accross the board

i had liek 2 horus to tune it on the highway.

and nah, i drive my car like a bat out of hell.

thats why i have to maintain it all the damn time.

im never out of boost normally

yeah, im curious to see gas mileage between rough tune and after Rom tune with more fuel delivery parts installed.

im hoping 450+ KM a tank...if i can get 300 id be happy

this 250km a tank is killing me

Should have gone Autech Grant. 650hp, 400kms a tank.

well that makes no sense to me .. hopefully someone will tell is what the go is

same here, thats why i was like WTF

so far 67 kms of hard city driving and it is still at hte full mark.

Yep, big turbo would be to blaim, when you're cruising along on the highway or whatever it is making less boost and the ECU runs is leaner.

It was the same for me with my old R31 that a HT-18 on it. Most the time was off boost, so fuel efficiency was awesome. As soon as you get up, you can just about watch the fuel needle dropping! A friend of mine with an R32 also has similar affects.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...