Jump to content
SAU Community

R33 Clutch Upgrade, Which One?

bokee
 Share

Recommended Posts

bokee Collaborator

bokee

Posted
Posted

hey guys am wondering if you can help me out i need a new clutch in my 33, i dont know which clutch would be best for my application and in my budget range.($600) i would prefer extreme (single plate) clutch because they are based in australia. NOw there is organic, ceramic, brass, carbon, what clamp load??? i hear that brass chew quicker through the flywheel. ive got 200rwkw but my goal is between 250-270 which will come sometime down the track. i love smoking rubber :( and kick clutch it every so often so i need something tough and reliable. its a weekend street car, now if you can tell me all your experiances with extreme clutches good and bad things

thanks heaps

Link to comment
https://www.sau.com.au/forums/topic/217863-r33-clutch-upgrade-which-one/
Share on other sites
~R33AzzA~ Proficient

~R33AzzA~

Posted
Posted
hey guys am wondering if you can help me out i need a new clutch in my 33, i dont know which clutch would be best for my application and in my budget range.($600) i would prefer extreme (single plate) clutch because they are based in australia. NOw there is organic, ceramic, brass, carbon, what clamp load??? i hear that brass chew quicker through the flywheel. ive got 200rwkw but my goal is between 250-270 which will come sometime down the track. i love smoking rubber :( and kick clutch it every so often so i need something tough and reliable. its a weekend street car, now if you can tell me all your experiances with extreme clutches good and bad things

thanks heaps

I had a exedy cusion button in my last 33 and that would chirp 3rd to 4th, but it only lasted 12 months and it was gone.

But when you let off the clutch pedal you certenly knew about it...

When i first picked up the car i stalled it as soon as i tryed to drive off. lol

NYTSKY Grand Master

NYTSKY

Posted
Posted

The Xtreme cushion button are great IMO.I had one for over a year and copped a serious hiding.There are two sets of rivets in the clutch plate compared to the one set in the Exedy item.

So for the money the Xtreme are a good option.$580 i think they are from Hi Octane.Clamp load is around the 900kg mark.

bokee Collaborator

bokee

Posted
  • Author
Posted
I had a exedy cusion button in my last 33 and that would chirp 3rd to 4th, but it only lasted 12 months and it was gone.

But when you let off the clutch pedal you certenly knew about it...

When i first picked up the car i stalled it as soon as i tryed to drive off. lol

yeah i am looking at the exedy one too. brass button cushioned like you had did u give it a good serve or what? cos i drive it like its not mine lol synchrons are worn in the gearbox as well so i have to have a look at reconditioning or something. thanks

bokee Collaborator

bokee

Posted
  • Author
Posted
The Xtreme cushion button are great IMO.I had one for over a year and copped a serious hiding.There are two sets of rivets in the clutch plate compared to the one set in the Exedy item.

So for the money the Xtreme are a good option.$580 i think they are from Hi Octane.Clamp load is around the 900kg mark.

yeahh for $600 i dont have many options unfortunately exdy or xtreme they are made by the same people i think so same poo really. i could afford more but new house is on the way and i just cant spend much. i bought the car just to have a bit of fun on the weekends, then i started upgrading and now its a never ending cost lol but yeah its all good fun am enjoying it while am young

  • 2 weeks later...
bokee Collaborator

bokee

Posted
  • Author
Posted

hey guys i gotta new clutch now i went for exedy heavy duty brass button, its in car and it is quiet grippy am loving it, i now realise how bad my old clutch was the car seems to pulls harder i couldnt believe it myself i just have to get used to driving it now as there isnt much slip.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...