Jump to content
SAU Community

Recommended Posts

i am relatively new to the Skyline scene but not new to blowing up gearboxes in turbo cars due to too much power.i am driving a 1994 gts-t with the rb25det engine,its an auto and as far as i know its standard.i am wanting to add some mods to what i currently have(full exhaust,hks pod filter,hks blow off valve and a turbo timer as far as im aware).how much power can the standard auto gearbox handle on a daily driver? also what kind of mods can be used to prolong the life of the gearbox? i am wanting to get up to around 400bhp at the flywheel and am checking out before i go and wreck the gearbox.

thanks in advance :(

Somewhere like Yarra Valley Autos or KEAS would be the places to talk to, very good in the business

All sorts of upgrades around i believe.

I dont think the stock auto will hold 400hp @ the fly to be honest. For a while maybe, but it will die so best get it done while you can.

speak to RCHOO (pm if you like)

he has blown two auto rb25det boxes

maybe he can shed some insight on the cause of failure

might be some helpful info too, he was getting one of them rebuilt too

i am wanting to add some mods to what i currently have(full exhaust,hks pod filter,hks blow off valve and a turbo timer as far as im aware)

Hmmmm.... The BOV and Turbo timer add eleventy billion rwkw!

stock box with a shift kit and trans cooler will handle up to 300rwkws for a while.

so if you only want around 230 rwkws, it should be fine, with just the shift kit and trans cooler.

if it starts flaring get MV autos to build you a custom box with high stall, which is what i have.

currrently running 320rwkws with 24 psi thru a gt3582r/iw daily driven.

I was told by MV also that the stock box will handle around 260rwkw in stock form, but mine with 235rwkw rides the 2nd gear band during the change for ages so a shift kit and tranny cooler are next on the list, and if I can afford it I will get the higher stall option aswell.

He said if I was going for more power then I would have to upgrade the box as it does not have enough clutch surface area in the box clutchpacks to hold onto much more power.

The 235rwkw I have roughly equates to 420hp odd at the flywheel.

Dave

I have gone through 3 autos before i finally had mine rebuilt

first 2 died with simply an rb25 pushing 250rwhp and they had oil coolers. boxes were a bit iffy though. I bought a good box though with only 40xxx kms and it lasted 2 days with 330rwhp and it had a KEAS full Manual kit. Now have my current box which has been rebuilt and it seems happy with 370 runnign through it. I was told the stock box should hold up to 350rwhp with a good oil cooler and shift kit, but i dont believe that lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...