Jump to content
SAU Community

Recommended Posts

actually i was told that things like bendix ultimates are made from compounds that are meant to squeak like hell. The guy said that's why u'll see GTR's squeaking like crazy when they pull up to a stop light. I can't confirm that myself of course, but it'll squeak cos it's a metal-based brake pad going against a metal rotor. i think..

Link to comment
https://www.sau.com.au/forums/topic/21815-squeeky-brakes/#findComment-463721
Share on other sites

I had ultimates on my old RX7 and they didn't squeek. Lots of dust though.

The shit pads on my Skyline squeal like mad when braking softly but not when braking hard. I'm pretty certain my discs are slightly warped though.

Link to comment
https://www.sau.com.au/forums/topic/21815-squeeky-brakes/#findComment-463740
Share on other sites

I had same problem, only seemed to be the front ones, couldn't machine discs though as they were at minimum, so I replaced with standard DBA's and new Bendix Metal kings, problem solved, only ever squeals if I let the dust build up as per any car, and the kings create alot of dust shows up bad especially on white rims.

Link to comment
https://www.sau.com.au/forums/topic/21815-squeeky-brakes/#findComment-464586
Share on other sites

Its not necessarily the pads causing it, although some pads squeal alot more than others.

The skyline is lucky enough to have 4 pots on the front, as a result theres 2 pins which run across the back of the caliper holding the pads and rattle/squeal plates in place. However when the brake pedal is depressed the pads and plates move along the pins causing squeaks and squeals.

Unfortunately theres not much you can do about it, you could clean the pins and plates but theyd soon get dirty again quickly.

It seems so many Sumitomo 4 pots ive heard do this, and as yet havent heard of a solution. I just wind the windows up :D

Red17

Link to comment
https://www.sau.com.au/forums/topic/21815-squeeky-brakes/#findComment-466699
Share on other sites

yes fixed the freakin problem, i took my right hand brake assembly apart, took the pads out and did the concrete/ sandpaper they were totally glazed!, chucked sum anti squeal shit (already had it on there neway) and i cleaned the disc. put it back together, went for a drive and the right hand is no longer squeaking :) BUT the left side is now :D oh well back to the garage

Link to comment
https://www.sau.com.au/forums/topic/21815-squeeky-brakes/#findComment-472791
Share on other sites

  • 3 years later...

i had some Project Mu pads on my car they were awesome but squeaked like crazy and i had to clean the rims every couple of days due to crazy amount of brake dust.

i had to change them cause they were worn, i was lazy and went to brakes plus.

these guys make there own pads, anyway got a set of them and they are nothing compared to my old pads, but they don't squeak not one bit and theres zero brake dust seriously i haven't cleaned my rims since i got them 2 moths ago.

personally i would rather have the squeaking and squealing than shit pads so im looking to get another set of the Project Mu's.

Link to comment
https://www.sau.com.au/forums/topic/21815-squeeky-brakes/#findComment-3218210
Share on other sites

I have bendix ultimate pads on the front and they squeel quite a bit. These were bought some time ago. Someone since informed me that Bendix admitted to a mistake and in all manuals have the incorrect brake pad for the skyline. Not sure whether this is true or not.

This is quite a timely revival as I was this afternoon talking to a mechanic about getting new rear brake pads. He recommended bendix ultimate as well. The cost of the pads was $140 plus $88 for labour. Is this reasonable?

Link to comment
https://www.sau.com.au/forums/topic/21815-squeeky-brakes/#findComment-3222358
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...