Jump to content
SAU Community

Recommended Posts

My gearbox has a loud clicking noise when it's changing from 1st to 2nd (under acceleration)

and from 3rd to od (when pulling off throttle) and going into reverse.

Cant hear it in the car only when the window is down

Don't know if it's serious because its still changing gears freely

keen to find out what it is so i can nip it in the bud

Link to comment
https://www.sau.com.au/forums/topic/218399-gearbox-click/
Share on other sites

  • 4 weeks later...

Ended up being a loose cv joint in the rear right (when jolted, would click)

not the gearbox after all :)

got it fixed for free during a gear box service

got a transfer case refill as well (0.5L!!) with no clear leak :D

Link to comment
https://www.sau.com.au/forums/topic/218399-gearbox-click/#findComment-3926740
Share on other sites

Ahhhh ok. Mine has been doing this for ages and I just stopped taking notice as nothing seemed to be affected. I had a feeling it might have been a rear C.V or something as the noise only have from the rear. Mind you it only does it when I'm reversing or just taking off in 1st under light throttle and then thats it, don't hear it again. Seems like a pretty easy fix then

Link to comment
https://www.sau.com.au/forums/topic/218399-gearbox-click/#findComment-3928354
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...