Jump to content
SAU Community

Recommended Posts

Heavy Duty Organic clutch kit (240rwkw), $335

Heavy Duty 5 Puk Button clutch kit (300rwkw) , $439

Heavy Duty Cushion Button clutch kit (260rwkw) , $445

Exedy (SC) Cerametallic 3 Puk Button clutch kit (330rwkw), $610

http://www.skylinesaustralia.com/forums/Ch...us-t200652.html

From sliding performance, all are far better than a stock Nissan clutch... and at a far more reasonable price.

All Sliding's advertised prices are around what I'd generally pay elsewhere.

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

I really don't think it's gonna fry your pads or make your gearbox/clutch explode if you do it either way...

If it did it would probably take eleventy billion years.

Or better yet, don't change gears or brake at all... or turn your car on because it puts wear and tear on it...

Fear mongering I think.

If it's wet I put the clutch in and rip the handbrake on then hold the car at a 45 degree angle as I approach the lights. Tyres don't wear in the wet,

LOL!!!!

I know your taking the p1ss, but something quite sad is there are people that get out in the rain and do their burnouts, not because the car is just so sh1t it cant spin in the dry (that's only 1/4 of the reason) but because they genuinely believe they are NOT wearing tires out, because tires dont wear if it's wet.

There ARE sad people around.

Back on Topic, I use the gears to slow me down, it's how I was shown to drive, and I feel I have control over the car, if something comes up and I suddenly need to accelerate, I am in gear and I just put the foot on the correct pedal, no shuffling for gears, having to guess the correct gear, it's already there.

Some of the arguments against backing off in the gears are that the box wasn't designed for reverse power transfer (power from wheels to motor), that replacing brake pads is quicker and cheaper than a clutch/gearbox, etc but there is also the issue of the law requiring that the driver always be 100% in control of the vehicle, and this also includes being in gear when applicable (you can neautral at the traffic lights with the clutch out, but otherwise unless driving changing gears, the vehicle should always have a gear engaged (not that this law is ever policed, but it's another law that's there if the cops are clutching at straws to book someone).

B.

LOL!!!!

I know your taking the p1ss, but something quite sad is there are people that get out in the rain and do their burnouts, not because the car is just so sh1t it cant spin in the dry (that's only 1/4 of the reason) but because they genuinely believe they are NOT wearing tires out, because tires dont wear if it's wet.

There ARE sad people around.

Back on Topic, I use the gears to slow me down, it's how I was shown to drive, and I feel I have control over the car, if something comes up and I suddenly need to accelerate, I am in gear and I just put the foot on the correct pedal, no shuffling for gears, having to guess the correct gear, it's already there.

Some of the arguments against backing off in the gears are that the box wasn't designed for reverse power transfer (power from wheels to motor), that replacing brake pads is quicker and cheaper than a clutch/gearbox, etc but there is also the issue of the law requiring that the driver always be 100% in control of the vehicle, and this also includes being in gear when applicable (you can neautral at the traffic lights with the clutch out, but otherwise unless driving changing gears, the vehicle should always have a gear engaged (not that this law is ever policed, but it's another law that's there if the cops are clutching at straws to book someone).

B.

Haha gold....that's not smoke coming off my tyres man it's evaporating rain causing steam!!

As for the car control neutral issue...that's exactly how I was taught over 20yrs ago. So it must be right :)

Probably more chance of warp/hotspots from using the coast/brake method than a combo of gearing and brakes...less load on the brakes = less heatsoak through pads/rotors and calipers.

Lol, heatsoak? When stopping at traffic lights?

I don't see how that could happen on the streets doing normal driving or even spirited driving.

Lol, heatsoak? When stopping at traffic lights?

I don't see how that could happen on the streets doing normal driving or even spirited driving.

I live in the hills, heatsoak isn't hard to achieve...

Done much spirited driving? :P

I live in the hills, heatsoak isn't hard to achieve...

Done much spirited driving? :P

Oh ok, I keep forgetting I'm running aftermarket slotted rotors, braided lines, and I don't know what pads I'm running (came with the car from Japan).

Yes I have done spirited driving and a track day at Sandown, the pads last 4 hot laps before they start getting soft on street tyres.

I don't live in the hills but I keep forgetting that when I bought my 'line it wasn't stock in the first place so I'll withdraw that comment, I don't know what stock brakes feel like.

Can I just ask something..

People are saying alot of "staying in control you need to be in gear" and "in case i need to accelerate"..

One question..

When do you ever need to accelerate when there is a red light and cars already stationary at the lights?.. For what reason would you ever want/NEED to accelerate towards a stationary/a red light with cars comming from both left and right sides?

Can I just ask something..

People are saying alot of "staying in control you need to be in gear" and "in case i need to accelerate"..

One question..

When do you ever need to accelerate when there is a red light and cars already stationary at the lights?.. For what reason would you ever want/NEED to accelerate towards a stationary/a red light with cars comming from both left and right sides?

Some idiot starts reversing out of a drive beside you? Some idiot pulls out from a parking space beside you?

Frankly, what does down-shifting do other than waste fuel on the heel-toe? If you are in a position where you need to stop fairly quickly, you probably don't have time to down-change. If you have plenty of time, friction (in the drive train) will do most of the slowing for you.

Yeah, I agree, which is why I coast. As well as the fact that I suck at heel and toeing so when I downshift the car jerks a crapload.

i like to do abit of downshifting or braking in gear then clutching it as i come to a stop, rolling in neutral will fail you your driving test in WA. also when downshifting you dont need to heel toe, i take the foot off the brake for a split sec to rev-match and put it back.

Some idiot starts reversing out of a drive beside you? Some idiot pulls out from a parking space beside you?

And you swerve onto the other side of the road into oncoming traffic (with some space there to make it back), you need to accelerate to get back into the LHS of the road before the oncoming traffic hits you but your in neutral and....

i like to do abit of downshifting or braking in gear then clutching it as i come to a stop, rolling in neutral will fail you your driving test in WA.

but to be honest...we are not talking about a driving test here. and the things you do in a driving test, you most likely won't do in day to day driving. for example...having your radio OFF while driving :happy:

Just think about what is cheaper at the end of the day, your engine or your brakes.

Engine was designed to accelerate not deccelerate. Even race cars, if they can get around the matter of having to lose all that energy, for the spped theay are normaly doing ( which you dont have slowing down on a red light ) they will not opt to gear down but coast it around the corners. Most drag cars shut down their engines once over the finish line, but that is a slightly more complicated matter, so I will not go there.

Brakes are cheap, use them. You odds of having to avoid anybody doing anything stuppid, at 30 - 40 kph is very small to nonexistent.

:happy:

Or some young idiot, in a hotted up hoon-mobile, comes around the corner totally out of control. If you can't accelerate and get out of the way, say goodbye to your wheels.

How about a $$$ reason - when you are slowing down with clutch still engaged, the injectors are not working, until revs drop to around 1500. If you clutch in, the engine goes to "idle", and the injectors start working to keep the engine running.

So, coasting into a stop with clutch engaged saves fuel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And if it still spikes, just for now, turn off VCT completely by disabling it OR simply unplug the solenoid. Just to rule out excessive exhaust pressure. I recall a video from Motive DVD about a decade ago, where Hawkins original single Garrett GTX3582 or so turbo had boost control issues sub 1.4bar of boost as well.   Food for thought? Is there anyway you can peg the WG completely open and/or dodgily not plumb it back into your exhaust system for testing purposes?
    • I will endeavour to give it a crack sooner or later. I have the wastegate apart at the moment so I'll replace it with a smaller spring just to see what it does and if I have to go back then so be it.   If it spikes to 23 but can then be controlled back to 20, then the gate must not be 100% open... So if it's not 100% open then why can't it drop the boost even further than 20psi (I understand it's not linear). What a headache this whole thing is.
    • Either the WG is reaching full opening, or it is not. The "it is not" case could only occur if there was not enough time available to swing the valve fully open during that boost event. I would consider that to be unlikely, as this is a commercial product that is in use elsewhere, so it really should work. But in your case, because there is definitely SOMETHING wrong, it should not be assumed that things like that are working as they should. You should put a video camera where it can see the actuator (if at all possible) during a run to see how far it is moving.
    • I think you're mostly on the ball there. With the straight gate, I suspect the weight of the spring will determine how quickly the gate can close, when not run with active pressure drive on both sides of the diaphragm. Otherwise, with drive on both sides of the diaphragm, you could almost go without a spring at all, only needing one to make sure that the thing was actually closed while completely off boost and not having pressure available to drive it closed. Butterfly valves have mostly symmetric loading when there is flow going through them, meaning that the gas hitting the upstream part of the blade is balanced by the gas hitting the downstream part of the blade, which means you don't need actuator torque to overcome any non-symmetric flow induced loads. But the gas flow does impart a purely normal load against the shaft, which transfers into the bush/bearing at each end of the shaft and does increase the torque required to make the shaft turn. Only a little, but it is there. I have no feeling for the amount of force involved in a WG application, but it certainly could make an argument for a decent spring weight being required. But all of this is just peripheral to the actual problem here.
    • The answer to this would be I followed the documentation from Turbosmart which said each spring pressure could achieve a maximum of 5x it's rated pressure so the included smallest spring being the 6psi had a range up to 30psi. I went with the 12 because I figured it'd likely hover around 15psi as a base pressure however I was obviously wrong.    I have a log here that I'll dig out that is purely wastegate and no Mac valve controlling anything.   If it can't hold anywhere near 12psi, does that mean the straight gate is virtually wide open during a run? Or am I thinking about this all wrong.   I could Tee Piece into the cooler pipe pre intercooler where the wastegate gets its feed, and send that to the ecu and see how that reads, I just don't have a spare pressure sensor currently that's all.
×
×
  • Create New...