Jump to content
SAU Community

Installing Tomei Procams, Gears, Lifters, Shims And Garrett Turbo,

Tomei_Powered
 Share

Recommended Posts

Tomei_Powered Rising Star

Tomei_Powered

Posted
Posted

Im posting this thread for everyone's knowledge on what parts to achieve what horsepower on a RB25DET since ive searched on the forum for PROCAMS and nothing came out.

So here it goes..

Ive waited 3 months for parts and headwork on my Skyline R33 RB25DET.

Currently its in a process of installing all the parts in.. finally.

Parts loaded was :

1. TOMEI PROCAMS 260 degree 10.25mm lift exhaust and intake

2. TOMEI Cam Gears

3. TOMEI 10.25 Lift Type B Valve Springs

4. TOMEI Solid Lifters

5. TOMEI Adjust Shims

6. COMETIC 1.3mm x 2 Layers

7. GARRETT GT35R Ported Shroud .82

8. Top Mount Ex. Manifold

9. TIAL 43mm Wastegate

10. HKS Type R 600x255.6x103 Intercooler

Was getting 192kw on wheels before this with stock internals.

Just a Apexi PFC, HKS 2540 Turbo, HKS Oil Cooler, HKS Intercooler (Type S), Greddy Boost Controller and Minor Upgrades.

Will keep this thread posted once the car is running and dynoed with the new parts installed. Car will be out this week. I hope...

Cheers!

Tomei_Powered Rising Star

Tomei_Powered

Posted
  • Author
Posted

hey guys,

Just got the car this weekend. Car is slightly tuned for road drivability.. Havent got the time to do a full tune atm.

For the solid lifters conversion, its pretty tedious work. Shims have to be added and measured.

Im totally unsure about what CR my car is running. The car started up alright. Nice idle and timing is great. When revving, the sound is awesome!

On higher RPM it sounds sharper, no joke but it sounds close to a Ferrari. =)

Im worried my oil pump will give way one day but will change it soon to accomadate the revs.

The turbine spools great. I just dont know how to put everything together. But everything just sound crazy guys!! The turbine has a pretty much like an aircraft spooling sound.

Hope to get my car tune tommorrow and will post up the numbers soon! Keep watching guys!

Cheers!

Tomei_Powered Rising Star

Tomei_Powered

Posted
  • Author
Posted

I can feel boost coming from 3300 rpm onwards.

No lag, nothing. Its insane to hear the turbo spools and the power is just crazy.

The turbo is a Garrett GT35R with ported shroud. I was worried when i installed the turbo because of lag.

But everything is going on well.

Tomei_Powered Rising Star

Tomei_Powered

Posted
  • Author
Posted
i am looking at doing the cams on my rb25det and cannot find anything at all....so this is really handy cheers mate

hey Krishy,

For Poncams is just plug and play.

I will recommend Poncams. Safe the hassle and money!

drgnball34 Rising Star

drgnball34

Posted
Posted
I can feel boost coming from 3300 rpm onwards.

No lag, nothing. Its insane to hear the turbo spools and the power is just crazy.

The turbo is a Garrett GT35R with ported shroud. I was worried when i installed the turbo because of lag.

But everything is going on well.

what you mean by ported shroud? Im assuming modified comp cover? And this gives hks spooling sound?

  • 3 weeks later...
  • 7 months later...
WHITER33GTS-T Veteran

WHITER33GTS-T

Posted
Posted

Did you ever get this tuned??? Am looking into bigger cams and solid lifter conversion at the moment.

Have Tomei 256 cams already. And have just has some issues on the tune with my 25/30 and had a rattle thru the top end after a few power runs @ 8200rpm.

What is the cost for a solid lifter setup???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...