Jump to content
SAU Community

Recommended Posts

Getting a gt2860rs for my rb20. Pls help me choose the right exhaust housing.

I lean towards the .63, to help with the spool up. I think dispopotato3 said, that garrett engineers made the real gt2860rs with a larger exhaust and comp housing on purpose. So u could run more ignition advance in the low revs. And to free up exhaust flow at the high revs.

Need your input!

Thanks!

Hmmm. I've been looking into nissansilvia forums. And most of the guys run .86 turbo housing. And they get full boost at around 4000rpm. Confused again. Final: .63 or .82 ? Which one will yeld better results ? Still want it to be drivable, but don't want to loose the rb20 hi revs also.

Full boost at 4k for the .86 sounds about right, though to put it perspective a GTRS will make 1.4bar at about 4100 on an SR and make another 20rwkw over a disco as well.

I just got deja vu. I'm sure i've written a near identical response somewhere else....

You're better off with the smaller one. Note that HKS only make the 2530 in a .64 as well. It's virtually the same turbo as a disco except for a very slight trim difference on the compressor.

How much power are you after? How much bottom end are you willing to give up? what are the intended uses of the car?

Normally i'd say go for the smaller housing but as of late i'm more inclined to say since its going to be gutless down low you might as well make sure it screams up high...but as mentioned it boils down to what you want from the car...

The only purpose designed T3 flanged GT28 turbine housing for that NS111 turbine is the HKS one found on 2530's/2535's 2540's and GT-RS's intended for RB20 and 25 . The A/R ratio is 0.64 , Garretts 0.86 A/R turbine housing was only ever made with the smaller T2/25/28 flange .

If you can find a GT2530 kit from an RB20/25 it would be easiest .

A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...