Now This Is Service

[FineLine]

Dont know where to start this post. We strapped my car on the dyno on friday in preperation for the track day today and thats when the bullshit started. Stainless highmount was warped and cracked again for the umpteenth time so game over.

Not so Says mic. I will custom build one and have it fitted and tuned in time. so he did. Then the shithouse braided turbo oil lines shit themselves, No probs says mic. goes and has custom hardpiping made up to suit.

Off we go again. blow off valve shits itself. No problems says mic, rebuilds it better than tyrbosmart intended. Away we go again. nice power, car idling and running beautifully, naking around 450 hp so we decide its time to dial in the water meth. WTF. lost the signal from the afm. several hours later and a long story short the w/meth signal was interfering with the afm and had done all along. several hours tuning down the farking drain. All this interspersed with the oiul filter blowing off on 3 different occasions and filling the bay and shop with hot oil.

Enough I said. Get f***ed said Mick, Get the hell out of my shop. So I did. 3 a.m. I gets a phone call. Hey bud. shane, Lazy bastard and I worked all night and fitted a haltech and retuned. 500 hp spinning the shit out of the tyres and still water meth to go. scarey.

BUT! She blew the farkin diff. OMG. So much respect to these guys for the unbelievable effort.

SIGNATURE PERFORMANCE YOU FARKIN ROCK

JINGA NINJA YOU ROCK

LAZY BASTARD YOU ROCK

I cant believe how fortunate we are to have men like Mick Oshea and Dan to give us such undodgy effort but today the sun shines firmly on Mick. You are a farkin champion mate along with your red headed sidekick. Hats off to the best effort I have ever seen.

[jaqule]

great story , shows the charecter of real car nuts!

[RaBBiT001]

Hate to be getting that bill, especially if they charge by the hour. Suppose once its up and running the cost wont matter as much as having a solid high power car, and a workshop that knows all the in's and outs of your ride, that you can count on time and time again.

[ToMMaH]

Noel, all i read from that was, "blah blah blah blah time to fry tyres with 500+HP on Friday the 30th of May at QR"

[Bunta]

Hate to be getting that bill, especially if they charge by the hour. Suppose once its up and running the cost wont matter as much as having a solid high power car, and a workshop that knows all the in's and outs of your ride, that you can count on time and time again.

knowing Mick the bill will be nothing like what it would have been at other places

[Dantay]

wow, what a day! Thats an extremely impressive work ethic and dedication

[MountainRunner]

I was there until 1am and those guys were totally focussed on the job.

[85URK]

u like fry lie! lol nice job guys, wanna see some vids noel.....

[n15m0]

Noel,

Once you sort out all your crap come and see me and I'll sort you out in the wheels department

[Amec]

good to see some workshops these days arent up and closing their doors at the tick of 5pm, top effort!!

[Devils_Advocate21]

nice job noel, hey curious what boost was all this done with? sounds like a little more winding to go in there yet

[FineLine]

nice job noel, hey curious what boost was all this done with? sounds like a little more winding to go in there yet

Can wind some more in if needed Adam but it just isnt neccessary bud. we still havnt really touched the tune as yet, just made it safe to make sure it was ok and it spat out the numbers we have been looking for all along. still got 1500/2000 rpm to throw at it yet plus a heap more timing and more fuel to come out and the water/meth setup to dial in.

I was beginning to think i had built a lemon until now. At last theres light at the end of the tunnel.

[Gts-t]

Hey noel,

it was good to meet you yesterday, also mick from signature thanks alot for helping me out when i got there.

Ill be back as soon as i can, the day really highlighted some things i need to do before i come back. How bad was my car sounding?

Also mountain runner if you are paul was good to meet you, you guys put on a great day thanks again

mick

[impact_blue]

I have one thing to say about all that...

YEEEEEAH BOI!

Effing love Mick Oh shaney, you're a'ight too... Weazel you suck

JK guys, we're a lucky bunch of SOB to have fellas like that huh!!! 5 gold stars for them

[MountainRunner]

Hi 2630GTS, your right MountainRunner = Paul and it was good to meet you also.

It sounded pretty bad up in the RPM range. Give Mick a call and get it on the dyno to sort it out before the next event. You got to run that car at the Nissan Meeting on July 8. It is one of the cleanest R32's I have seen.

[japtaxi]

hats off to those dedicated car nuts!

some workshop needs to learn from this instead of not return calls, lost/damage car parts..

[psi]

Honour and respect are two great values that seem to be long lost in our modern living..

I know a diesel mechanic just like that, pitty he is crap with pretrol.

I read this post with interest and notted no vegatives, no mess or slander.. Hmm, does that make him a guru?

Anyhow, I am sure the whole expereince has left u with a very warm, humbling, fuzzy feeling.

I bought a 6 pack for the last guy who displayed traits like this, i did it when my mechinist did an all nighter to get a bunch of parts ready for me when i needed them done yesterday and i was knee deep in a broken car. He was more than happy to do it, and asked me to call again next time and bring a pair of 6 packs to share with him...

Congrats Noel!

[Modena]

Nice service mate.

[H@ME]

noel that sucks but hats off to signature perfomance! can't wait to see the car in action with 500hp after all the time and buttloads of money into it! cheers mayne! Hame

p.s i bought an r32 project:D

[Ceffy]

Sorry to dig up and old thread, but a year and a half later, and I still got the same amount of quality workmanship and effort in the 1st post. Bought a car, 2JZ powered S15, with so many clutch problems and now have been sourced and fixed by Mick and his team. Yea the bill at the end sucks but no one ever said motorsport was cheap...

Cheers, Matt...