Jump to content
SAU Community

Recommended Posts

It need's to be fixed to the car. As in it can not be removed by any expected forces from racing.

i.e. a gauge screwed into console will hold

a 10kg object screwed in by one screw will not.

You are a smart man Jase!

Also things like suction cups I won't allow. They are really not secure.

I know people have those cameras attached to camera mounts on suction cups.

I know VZSS has one and modified it so that it was bolted in to the child safety restraints. Maybe PM him?

Just a heads up so people with these don't get cranky on the day.

  • Replies 547
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Wakie license yes at the admin office. You might want to go through scrutineering first as you will be in one of the first groups and there will be a line.

As in bolting to the centre console?

If you could make a steal bracket and bolt it to a structural point that would be fine.

But it would be hard for me to say yes over the net for something I haven't seen. If you want we can talk about this over PM or if you come down to mikes the night before I can try and help you figure something out.

yep understand completely....I just want to use 1 or 2 thermocouple readers which would weigh 200-300grams...I'll make a bracket that will withstand at least 4g peak load which means 1-2kg force won't break it...if it passes it passes, if it doesn't it doesn't and I'll put it in the glovebox...

Do you has to have a visor fix on to the helmet?

Wahhh???? *is confused* haha we are checking for damaged helmets. aka cracks & stuff.

yep understand completely....I just want to use 1 or 2 thermocouple readers which would weigh 200-300grams...I'll make a bracket that will withstand at least 4g peak load which means 1-2kg force won't break it...if it passes it passes, if it doesn't it doesn't and I'll put it in the glovebox...

Yep. Come see me the night before I'll come check it out and let you know what I think. :D

Re the power point question,,,there are heaps of power points in the carports,,,no need for a long extension lead mate.

Sorry Corrine as I am not having a go at you for one minute but I always find it funny that you are not allowed to have say a pencil type camera cable tied or race taped inside the cabin. I have been to tons of race meeting and seen these cameras tied and or race taped to the outside of cars sail through scrut. Now if it is unsafe inside (which it is) why allowed them on the outside?. I'd look pretty funny with someone elses camera inbeded in my head.

Neil.

You are a smart man Jase!

Also things like suction cups I won't allow. They are really not secure.

I know people have those cameras attached to camera mounts on suction cups.

I know VZSS has one and modified it so that it was bolted in to the child safety restraints. Maybe PM him?

Just a heads up so people with these don't get cranky on the day.

DIF

I have a suction mount camera designed for motor sport which has been used at Wakie both inside and outside of the car on an Autosports day. I assume this would be ok?

It's designed to hold onto the outside at over 150mph and i don't think i'll be getting anywhere near that. I'm not fussed on the outside of the car but will be using it on the inside.

It's called - Motorsport Hero Camera. Tiny, yet effective :laugh:

Cheers

Bobby

Same here for the camera mount I've had mine in heaps for cars at race meetings even bathurst no one said i couldn't have it in the car it was classed as safe for cams meetings. but the camera that is on the mount is like the size of a wheel nut.

.

Edited by motoractionservices
Same here for the camera mount I've had mine in heaps for cars at race meetings even bathurst no one said i couldn't have it in the car it was classed as safe for cams meetings. but the camera that is on the mount is like the size of a wheel nut.

.

:geek:

Same with mine, just checked the name and it's the GoPro Hero.

Is this what you've got?

I screwed up my sound setting last time and had no sound at all!

It's even funnier that cams have no real written rules regarding cameras so they have left it up to the poor scrut to work it out. I had old man Cary Butchers (spelling) Michele's log book man design my video holder and he now points to it saying thats whats required. I've seen shift-light size ones duct taped to roofs pass scrut and all the little ones like the suction cup hero. Scary was one guy at a Powerplay day that cable tied his including the tripod to his headrest poles.

Titan,,,don't worry about the weather mate,,,it's all good for learning your race-craft. I was always worried about driving in the ran,,,now I love it!!!.

So a good idea for everybody should be to replace those old weather beaten wiper refills with some new ones.

Neil.

Wakefield are now even selling in car cameras... have a look when you sign up, they're on the shelf next to the helmets. My suction one is also rated to 150mph and has passed CAMS scrutineering in the past, but its up to the Chief Steward to make the final decision either way, so can change accordingly at their discretion.

scott, thanks for bringing the pics will be great to grab them.

re power, it is in every garage. there is air at the end of the first row of garages but no pressure gauge.

as for cameras (or anything else) the rule generally is that lipstick style cameras are OK but full handycams etc are not. this will be formalised from 1/1/09 for sure. as for suction cups I have used one to hold a full sized camera and it was not safe in my opinion, i only ever used it once. would be fine to hold a lipstick camera though they are only about 100g - even in a 5g crash that would only be 1/2kg




  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...