Jump to content
SAU Community

Recommended Posts

hey ppl i have serched and cannot find

i have just put a s2 motor into my s1

i replaced the loom to s2 everything is s2 ecu and all

i went to start it today it turns over but wont start it has good compresion

also the starter motor make a massive squeal noise after to trys to start i brought the motor off a guy here (third motor off here) the motor seems to be fine i dint touch anything when putting it in

it tried to start but wont fire

i have checked all connections battery is charged

i live 4 hours form adelaide and thinking of trailoring it down to boostworks

can some help me

Link to comment
https://www.sau.com.au/forums/topic/219479-r33-s2-motor-wont-start-in-my-s1/
Share on other sites

running stock ecu diag would provide a great help

you could check all the sensors, and check on board diag, it even tells you why the engine failed to start

put up a post in your local state chaper, asking for someone with a consult cable & software

offer some beer for a visit to come out and plug it into a laptop, will clear up a bunch of issues and sensors to ensure they are working

if you cant get access to consult - go see a work shop like you said

trying unplugging afm, see if that helps, try unplugging water temp sensor, see if that helps

goto the tutorial section, look for a post by "Cubes" he has done a wiring chart, which covers what you need

lastly if you cant find that, look at my website paulr33.skylinesaustralia.com im pretty sure the same data is on there

look under wiring diagrams on my site

hey ppl i have serched and cannot find

i have just put a s2 motor into my s1

i replaced the loom to s2 everything is s2 ecu and all

i went to start it today it turns over but wont start it has good compresion

also the starter motor make a massive squeal noise after to trys to start i brought the motor off a guy here (third motor off here) the motor seems to be fine i dint touch anything when putting it in

it tried to start but wont fire

i have checked all connections battery is charged

i live 4 hours form adelaide and thinking of trailoring it down to boostworks

can some help me

Mate try Hybrid z`s web site, It shows you every wire you need to get it going as I just did a rb25det conversion myself. It started first time I S%^T myself. I can send the file to you I has pics and all. Note 260z ignition wiring is very similar.

Zyline

Ok so first, go send that guy his oil relocation kit

Then when you have done that, check the computer. Mine did EXACTLY the same thing when I stripped my engine down. I did everything, even pulled apart the afm to check the board and cleaned that with contact cleaner, cleaned the afm, checked plugs, the comp, checked injector voltage, afm voltage blablabla. I did everything except for one of the most basic and easiest things I could have checked. Turns out somehow I got my ecu mixed with my mates when both our cars were in pieces in the garage and I had a s1 ecu, swapped back and went fine.

ok oil relocation has being send already

ok i have two ecu here but i am 100% sure the ecu im using is a s2

wat if i have wired the wires worng if someone can tell me hwat wires go to what wire from s2 loom to s1 plug that would solve my problem

Edited by teazn_r33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...