Jump to content
SAU Community

Recommended Posts

hey ppl i have serched and cannot find

i have just put a s2 motor into my s1

i replaced the loom to s2 everything is s2 ecu and all

i went to start it today it turns over but wont start it has good compresion

also the starter motor make a massive squeal noise after to trys to start i brought the motor off a guy here (third motor off here) the motor seems to be fine i dint touch anything when putting it in

it tried to start but wont fire

i have checked all connections battery is charged

i live 4 hours form adelaide and thinking of trailoring it down to boostworks

can some help me

Link to comment
https://www.sau.com.au/forums/topic/219479-r33-s2-motor-wont-start-in-my-s1/
Share on other sites

running stock ecu diag would provide a great help

you could check all the sensors, and check on board diag, it even tells you why the engine failed to start

put up a post in your local state chaper, asking for someone with a consult cable & software

offer some beer for a visit to come out and plug it into a laptop, will clear up a bunch of issues and sensors to ensure they are working

if you cant get access to consult - go see a work shop like you said

trying unplugging afm, see if that helps, try unplugging water temp sensor, see if that helps

goto the tutorial section, look for a post by "Cubes" he has done a wiring chart, which covers what you need

lastly if you cant find that, look at my website paulr33.skylinesaustralia.com im pretty sure the same data is on there

look under wiring diagrams on my site

hey ppl i have serched and cannot find

i have just put a s2 motor into my s1

i replaced the loom to s2 everything is s2 ecu and all

i went to start it today it turns over but wont start it has good compresion

also the starter motor make a massive squeal noise after to trys to start i brought the motor off a guy here (third motor off here) the motor seems to be fine i dint touch anything when putting it in

it tried to start but wont fire

i have checked all connections battery is charged

i live 4 hours form adelaide and thinking of trailoring it down to boostworks

can some help me

Mate try Hybrid z`s web site, It shows you every wire you need to get it going as I just did a rb25det conversion myself. It started first time I S%^T myself. I can send the file to you I has pics and all. Note 260z ignition wiring is very similar.

Zyline

Ok so first, go send that guy his oil relocation kit

Then when you have done that, check the computer. Mine did EXACTLY the same thing when I stripped my engine down. I did everything, even pulled apart the afm to check the board and cleaned that with contact cleaner, cleaned the afm, checked plugs, the comp, checked injector voltage, afm voltage blablabla. I did everything except for one of the most basic and easiest things I could have checked. Turns out somehow I got my ecu mixed with my mates when both our cars were in pieces in the garage and I had a s1 ecu, swapped back and went fine.

ok oil relocation has being send already

ok i have two ecu here but i am 100% sure the ecu im using is a s2

wat if i have wired the wires worng if someone can tell me hwat wires go to what wire from s2 loom to s1 plug that would solve my problem

Edited by teazn_r33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...