Jump to content
SAU Community

Recommended Posts

Awesome result! Any pics of the turbo before it went on? The only internal gate TD06s i have seen dont look to have great wastegate and dump design. So if these are the results then bugger what they look like and what i woudl of thought would be high back pressure. Go for the bolt on low mount convenience for the same result. Same power at same boost :D

Link to comment
https://www.sau.com.au/forums/topic/219609-put-on-my-td06/#findComment-3874733
Share on other sites

What other mods you got?

The usual stuff. FMIC, gtr injectors, 040 pump, cam gears, big zorst

is this a stock rb20 or rebuilt? very nice figures

Stock as a rock internally

have you got the dyno sheet with the boost response? when do you hit max boost? and how bad is the boost creep

Max boost about 4500rpm and with an 18psi map it went up over 20psi top end. Set to 16 and it creeps to 18.

No pics sorry Roy.

Link to comment
https://www.sau.com.au/forums/topic/219609-put-on-my-td06/#findComment-3875077
Share on other sites

hey roy in your opinion wats the best highmount tdo6 you can, wandering if theres a ballbearing version of the tdo6 20g 8cm... this is for my r32 aswell, have been checking yours and ronins car out and am very imressed y how they perform

Link to comment
https://www.sau.com.au/forums/topic/219609-put-on-my-td06/#findComment-3875254
Share on other sites

Impressive, I didn't even know td06's came in low mount, let alone internally gated!

hey roy in your opinion wats the best highmount tdo6 you can, wandering if theres a ballbearing version of the tdo6 20g 8cm... this is for my r32 aswell, have been checking yours and ronins car out and am very imressed y how they perform

No td06 is ball bearing

Link to comment
https://www.sau.com.au/forums/topic/219609-put-on-my-td06/#findComment-3875280
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...