Jump to content
SAU Community

Recommended Posts

What brand;

Autometre ( are they accurate but? )

Spitfire ?

VDO

Actually I want one with a black background but with green dials and numbers. ? is it called ****pit vision or something?

What should I be paying for it and how much do they charge for install. Or is it easy and can u do it yourself ?

Thanks

Guest RedLineGTR

How much do you want to spend thats the thing...most people got for autometre ones they are cheaper and look better than the spitfire and VDO gauges. The Auotmeter ones are heaper than the jap brands but i personlly dont like the look of em i rather pay abit more and get jap one with some style some people are happy with the autometer ones, depends on your own personal choice. Cheers Rob

Depends on what your after.

I got a VDO boost and oil temp in mine cause I wanted the factory look.

Everyone said that the VDO boost gauges weren't very good, but when I had my car on the dyno the boost gauge was out by 0.2psi at 12psi (dyno read 12.2psi and boost gauge said 12psi) !!!

I think that is pretty good for the $125 that I paid ;)

J

Guest Boxhead

yes it comes down to how much you want to pay, i know my boost gauge is very accurate, on dyno it read 12.55 psi and gauge said just in between 12-13 psi...

im happy, it does the job, personally, i rekon its best to keep an eye out on the forums etc might get one cheap, or go to an import wreckers, they might have what your after... as i have asked one place, and he said they get them all the time, but just didnt have any atm coz there waiting for next container to arrive...

by the way i have an autometer

Do u think I should get an oil pressure one aswell, since I only have a stock one on the dash at the moment.

If I buy one, it might be more accurate than the dash one ?

my car is standard at the moment, do u think I would need an oil temp one or maybe a voltmetre might be handy.....I was thinkin about riggin them up under the stereo...

No pillar mounts as they are illegal so I heard

Swordfish, just for your reference, this is my din gauge setup..... a boost gauge is going in where the factory clock is and i'll be moving the climate control down the bottom and the gauges up to the top in a few weeks (wire lengths permitting - finger crossed!)

i've got a "swoosh" gauge that cost me $80 new, when tested on the dyno it read about 1psi more than the dyno gauge, works for me :(

Swordfish19792002: piller mounts r legal as long as there below the top of the steering wheel.

Guest Boxhead

not cheap at all... and also they are electrical, therefor you need controller which i have heard is around the 400 ish mark alone...

go the glovebox set up :( stealth, and when car is parked, no one will see gauges, and go, smash window rip them out...

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...