Jump to content
SAU Community

Recommended Posts

You'll need a heat gun/hair dryer and a blade. Something like an emo blade, then heat and slice/carve away...

I've read a few stories of people trying to remove tint themselves and they've all recommended others to get it professionally done. Only $80 or so anyway.

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3887375
Share on other sites

i did mine my self

yes it can be a bitch but why pay some one money to do it when you can do it your self

as long as ur not a drop kick you'll be fine

i just ripped the tint off and used hot soapy water and sharp emo blades lol to get the glue off

it does take time but so what

and apparently there is this spray u can buy which you just spray on to the sticky stuff and u just wipe it off but i couldnt find it any where

hope this helps

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3887516
Share on other sites

i thougth it was ok to have darker tint on the back and rear quarts. its just the drivers and passengers that have to be legal

A topic about tint came up in the Vic section a few months back and it's only legal to have the rear quarter windows dark. So pretty much the windows that the driver need to look through to drive can't be darker than 30% (I forget the exact number :D ).

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3889081
Share on other sites

Easy!! Done it many times! all you need to do is peel the tint off and you will notice the sticky gluish residue on the window. this part is the bitch part. all you need is a spray bottle with water or window cleaner in it and a razor blade with a handle and start spraying and scraping away. it may take time but unless u want to pay someone to do it its gonna take alot more time to get your car checked.

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3889382
Share on other sites

i did mine my self

yes it can be a bitch but why pay some one money to do it when you can do it your self

as long as ur not a drop kick you'll be fine

i just ripped the tint off and used hot soapy water and sharp emo blades lol to get the glue off

it does take time but so what

and apparently there is this spray u can buy which you just spray on to the sticky stuff and u just wipe it off but i couldnt find it any where

hope this helps

Time is money.

If its going to take me 3-4 hours of time, and fiddly at that

For $80, its money well spent and lets one do other things.

Fair enough if you sit @ home all the time and dont work/leave the house etc... DIY probably would be worth while... include purchasing blades, cleaners etc knock another $10-$15 off the price off someone with the tools doing it

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3890285
Share on other sites

Hey thanks for the insight lads. I may just get someone do to it properly as time is quite tight at the moment.

Also, While failing me for tint they also got me for the child restraint brackets. They are in the middle of the speaker and "should" be in front of it. WTF do i do to fix that??

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3893307
Share on other sites

If your car has been complied by an authorized workshop you will have no trouble passing with those child restraints where they are.

The fact the cops even picked on you for that is stupid. The workshop has all the certs/tests etc required to say that they are effective where they are.

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3893315
Share on other sites

i thougth it was ok to have darker tint on the back and rear quarts. its just the drivers and passengers that have to be legal

It's all respective of the state you live in....

For NSW, the law is the rear windows and windscreen can be as dark as 5% tint, with NO tint on the front side windows, and only the top 10% of the front windscreen tinted as well (For business vehicles and taxis)

Or

All windows no darker than 35% tinting all around, but only the top 10% of the front windscreen tinted (for business vehicles, and taxi's).

For passenger cars, the NSW rules are no darker than 35% tint all around, and only the top 10% of the windscreen tinted.

This can be different for other states, and thus you need to check your local area.

As for the 2 defect issues, There is a spray you can get to break down the tinting glue, call up a local tinter and ask them the best thing to remove tint before you take it to them for re-tinting (if you take it or not is not their business, but if they think your making their life easier, it will help you get the information).

As for the restraints, they will be checked off on your compliance stickers.

Something everyone needs to remember is that a Police officer's "defect list" is not an actual list of defects on the vehicle, but a list of the things he believes should be checked by someone that knows the ADR requirements, and regulations of the local area. For a cop to ping you for stuff like this, either he didn't get his coffee and doughnut, or you didn't pass his personality test.

For an example, yesterday I took a highway patrol officer for a drive in my car, because he had never been inside a Skyline GTR in a 'civil' environment (off duty). He pointed out the lack of H-pattern on the gear lever (can place a sticker within 10cm of the gear lever to comply in NSW), and the twin POD filters under the bonnet, but other than those things, he said unless I really upset the officer, I would be sweet with.

He also mentioned a simple cover on the PODs will not surfice, as the legal requirement for NSW is a SEALED enclosuer for the pod filters.

Personally, I have heard mixed 'stories' about the child restraints, from rear speakers removed and restraint clips fitted, to restraint clips fitted stock BEHIND the speaker grills, but this is still debatable, and should be covered under the compliance of the imported car.

Good lock with everything.

B.

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3893356
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When sanding across a convex panel, you need to sand, as much as possible, at right angles to the curve. If the panel is compound convex curved (ie curved in both directions) then you are SOL and have to use "craftsmanship" to get it right.
    • Today in Skyline arts and crafts!! I’ve made some progress.    had to put extra notes in there so I don’t stuff it up 😂
    • This sounds like me. And then why I leave shit that I had previously hobbled together broken. Lately I've changed strategies to "If I don't want to justify the money on decent stuff, I'm not going to justify hobbling it together". I'm still for DIY, but DIY it properly is more my thing. However, I am terrible on not setting up backups still... Which reminds me, I need to go backup some of my work VM machines... Oh, it's also why I've become a lover of building things into Docker Containers... Then I just need a machine that can run docker, and bam, that specific system is up and running, on the specific versions of everything I need for it to run (In the event a change in required software version breaks something else). Also, these days, my steep learning curves are spent with work related stuff, and on very varied projects, that my want to do other random projects like build a dashboard for my own car has dwindled away to "I just want the car running", which is my current PITA, as I'm getting the Landcruiser usable again, and it has just been non-stop the past 6 to 8 weeks of buying parts, and working on it. Oh, and tools that are meant to be fit for purpose... And they break, because 25 year old 4WD decides it's stronger... But by the time I have it ready to roll back out the drive way, nearly all the stuff in it will have been touched and serviced, so the damn thing better give me NO FREAKING ISSUES, for at least the next 50,000KMs! Just redone whole front of the motor, and resealed the up top stuff, replaced a bunch of things getting perished, new timing belt done, water pump, lower timing cover (Toyota diesel engine runs timing GEARS for the bottom half the motor, and a timing belt from halfway up to the top), new harmonic balancer, fix up the alternator, new thermostat, full swivel hub rebuild, new bearings and seals front and back, steering box rebuild, new battery, and today, it turns out a rear shock has let go, so four new shocks are about to go on order, and that will leave me with after the next run of work, to see if I need to order just a brake caliper re-seal, or if I'll need new pistons in them too. Oh, and I'll finish welding in the new floor sheet metal shortly too. Presently I just want it finished already... But once all the above is done, I still need to fully service diffs, gearbox, transfer, and motor. Then flush and bleed the clutch, and flush and bleed the brakes. But enough about our waffle, back to Duncan's heat problems... I think for Duncan he just gets a thermoswitch, and a manual switch to run some water misters. Thermo so it's only on above certain temps, and the manual switch so it can be turned off even if it is above certain temperatures. IE, switch on for "I'm now on track", then it doesn't need any "smart" computers that might try and do things wrong. And switch the thing off completely on the cool down lap, so when he stops in pits, there's not even a possibility of it dripping any water out to get him in trouble.
    • So I ran into the same problem. I got stuck in the cycle of again of putting putty sanding it, putting putty sanding it, because of a low spot. And notice my block is not completely flat with the panel, even though it's a long block. My panel is slightly curved. Is this an issue? Do I need something that matches the door perfectly, or no?    I do have the smaller flexible block that covers the width of the repair just not the length, I was experimenting with it again to but seems to be the same issue
×
×
  • Create New...