Jump to content
SAU Community

Taking An Uncomplianced Car Over On The Spirit Of Tasmania


Recommended Posts

Hey guys I was just wondering who has taken an uncomplianced vehicle or a vehicle on an unregistered vehicle permit across on the Spirit of Tasmania? I called the other day and they said that I needed to have a RWC on the car to take it on, but the reason it is on an unregistrable vehicle permit is because it isn’t road worthy.

If anybody could give me any advice or let me know of any experiences they have had with this it would be great. I have checked out freight options and that looks like it may be the go at this point, however it would be somewhat of a hassle to get the car to the docks.

Cheers

Ryan

when we took a heap of targa cars to Winton for the 6hr race back in 2003 we just used temp permits and they were happy, but they got stressed about some of them not having number plates to begin with. i reasoned with them that they were are all tidy well kept cars and they came around.

Thanks for that Stuart. When I was on the boat last time there were 3 fully caged evos on there with no plates and plastered in stickers so Im not sure about the whole RWC thing, i think its a crock of shit, my car is more road worthy thatn some of the old cooners Ive seen boarding before

Wack some false plates on it (for the boat jouney only)....they don't/can't check with the authorities, they just need a number to put in their system to complete the order.

yeah some of the cars we took to winton still had their targa plates on and we booked them with those numbers, but had permits as they don't have real rego attached and they weren't stress about those cars at all!

When i first brought my car over, spirit of tas website showed that u had to put a rego in to book it, so i just typed NO-REGO and hey presto it let me book the journey and they didn't say much on the boat when loading the car.

car needs to be roadworthy, it would have to be put over the pits to get an unregistered vehicle permit, if the car has a uvp it must have already passed as roadworthy vehicle, the uvp will allow you to get the car from a to b only. permits are only valid for a short time, im sure it was 7 days for me after the car was blue slipped (passed as roadworthy).

also if the same rules apply here as they do in NSW, once a car has an unregistered vehicle permit and the time period expires it is no longer able to be extended or you can not get another permit for that vehicle.

when we got the ute from NSW it had to be blue slipped and roadworthy and passed over the pits to get the uvp. a uvp certificate at the minimum has to be applied before they would allow it on the spirit of tas.

it is a hassle, but cant be avoided.

It doesnt need to go over the pits in VIC to get a permit, what a joke, in vic you can get them over the phone. Pretty much everything you said doesnt apply, but thankyou, I do appreciate the input anyway (serious)

Anyway, cars here so all the doubters, NER NER NER

THREAD OVER

that is a joke!

will make it easy to transport a burnt out 3 wheeled unregistered vehicle.......

did the vehicle have to be inspected or pass any criteria before it was permittable for road access?

was the car permittable for road access in both states or did it need to be on a trailer?

NSW RTA being more stricked on road and transport than any other state of australia, that will all apply regaurdless to where in australia its being driven (except WA i think, where UVP's dont cover).

it would probably be only a matter of time till legislations will be passed where all states in australia will be as hard and stricked on any form of vehicle transport and registrational status.

yeah vic and tas run the same sight unseen issuing of temp permits for up to 42 days... a mate actually got a permit to drive his formula vee on the road a few years ago to run in the engine!

that is a joke!

will make it easy to transport a burnt out 3 wheeled unregistered vehicle.......

That’s a bit of overkill, it is a "roadworthy" vehicle, it was able travel from Caulder to the boat and then to move onto and off the boat all under its own power. All lights and indicators work, no leaks of any sort, tires are good, it’s not overly low and I can put silencers in the pipes to quiet it down.

Straight from VICROADS:

1. A vehicle to be used between the hours of 7:00pm and 7:00am, except in the following circumstances -

• where a vehicle is collected from the place of purchase to be driven to the residence of the owner or the garaged address nominated on the permit; or

single trip journeys where specified on the permit form

Show me a burnt out three wheeled shell that can do that :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...