Jump to content
SAU Community

Recommended Posts

I need some SAU help to clear my defect. I need to borrow stock suspension parts for a R32 GTR.

Specifically:

  • non-adjustable caster and camber arms (front and rear)
  • shocks and springs

I need some SAU help to clear my defect. I need to borrow stock suspension parts for a R32 GTR.

Specifically:

  • non-adjustable caster and camber arms (front and rear)
  • shocks and springs

I have non adjustable bilstein and tein coilovers as well as stock rear upper control (camber) arms - you'll need to get bushes for it tho

-D

  • 3 weeks later...
  • 3 weeks later...

I now have stock front caster arms that you can borrow,

Let me know and ill get them to Abe to pass on.

I need some SAU help to clear my defect. I need to borrow stock suspension parts for a R32 GTR.

Specifically:

  • non-adjustable caster and camber arms (front and rear)
  • shocks and springs

  • 3 weeks later...

Hi all i need atleast 3 34 neo coilpacks that are working, need to find out witch 1 of my new supersparks is shit:(

If you dont have any luck you could try unpluging one at a time and listen for a decrease in engine revs. If it dosent go down when you unplug it then that must be the faulty one.

Need to borrow a set of rims and tyres suit gtr.. Till feburary latest?

Thanks

No-one is going to let you borrow their rims and tyres to drive on til February. your best bet is to buy some cheapies.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...