Jump to content
SAU Community

Recommended Posts

i wanted to take my air filter, afm the whole pipe off but then i saw there are a couple of pipes attached to it...so can i just block these pipes? or do i let it be.

also anyone else done this? was it easy?

just thought i would ask you guys this befor i chop pipes and hoses lol

thanks

Link to comment
https://www.sau.com.au/forums/topic/220816-removing-whole-air-filter/
Share on other sites

i wanted to take my air filter, afm the whole pipe off but then i saw there are a couple of pipes attached to it...so can i just block these pipes? or do i let it be.

also anyone else done this? was it easy?

just thought i would ask you guys this befor i chop pipes and hoses lol

thanks

Why?

so i can get a dossing sound..

trust me bud, women dont like it. i know you're doing it for the ladiez and think they get nipple fats when they hear it, but really they think you have a small dingaling.

but anyways back to the topic, the 2 pipes connected to the intake snorkel is your blow off valve return line and a crankcase breather (or blowby).

i wouldnt go blocking off the breather but if you're not going to run a bov then you can block off the bov return line.

OR.

save yourself the headaches and potential turbo/engine damage and get a stainless steel intake pipe. you'll have mad flUttErZzZzz.

Edited by dmr
trust me bud, women dont like it. i know you're doing it for the ladiez and think they get nipple fats when they hear it, but really they think you have a small dingaling.

but anyways back to the topic, the 2 pipes connected to the intake snorkel is your blow off valve return line and a crankcase breather (or blowby).

i wouldnt go blocking off the breather but if you're not going to run a bov then you can block off the bov return line.

OR.

save yourself the headaches and potential turbo/engine damage and get a stainless steel intake pipe. you'll have mad flUttErZzZzz.

and no i am not doing it for the ladies i have a misses alredylol i just want the big dose sound because i simply just like it

yea i was going to do that why not do it?

1. it's not designed to run in the cooler piping

2. wierd readings

2. the reading pin inside the air flow meter is a delicate object which you wouldn't want to damage at high boost levels.

Edited by dmr
1. it's not designed to run in the cooler piping

2. wierd readings

2. the reading pin inside the air flow meter is a delicate object which you wouldn't want to damage at high boost levels.

i am only gonna run 13-14 psi only..hmm might not do this now arhhh

mate this site is full of critics. if u want dose, than all the best with it. Whether they think its a wank factor or not, when a car doses everyones heads turn. and so what if they have no performance benefit, neither do bodykits or bigger wheels, yet most cars on this forum have one or the other, if not both :)

Quicky has it on the head, damage wise shouldnt cause a problem on low boost but ive seen the vl guys running 20psi on there rb30s with no issues.. It does sound "off tap"

Omar I looked everywhere for that Pink Unicorn... wtf is it?!

Edited by DECIM8
Technical info just in, sick dose sound does not come just from metal pipe.. tested and offically makes induction sound louder but not dose.. tightening the bov will tho.

how do i tighten my stock bov? can you do that to a stock one?

mate this site is full of critics. if u want dose, than all the best with it. Whether they think its a wank factor or not, when a car doses everyones heads turn. and so what if they have no performance benefit, neither do bodykits or bigger wheels, yet most cars on this forum have one or the other, if not both :)

yer i will get dose lol ill look a bit more into it..cheers

Technical info just in, sick dose sound does not come just from metal pipe.. tested and offically makes induction sound louder but not dose.. tightening the bov will tho.

you can tighten your stock bov by putting it under a vice grip and "crushing" the top of the bov a couple of millimeter. i would only advise this if you're doing it for bov leaking purposes. using a blanking plate is the same as tightening a bov enough for no air to pass through.

stainless intake pipe will increase the sound of your "dose" because of the resonating sound traveling through. the standard rubber snorkel deadens it.

have a read of THIS. he's apparently the master of "dosing". your new best friend.

hope that helps!

Edited by dmr
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...